Search results

[[Category:106.3.2 Material Inspection Test Methods]] ...

Specific requirements for inspection and testing are found in the Engineering Policy Guide. ...ruction Inspection Guidance for Grading and Removals]]). Additional field inspection guidelines are located in the EPG 1100 Maintenance Materials group of artic ...

...s ability to penetrate a compacted asphalt mixture or a granular aggregate material. :T59 Standard Method of Test for Emulsified Asphalts ...

...[:Category:106.3.2 Material Inspection Test Methods|EPG 106.3.2 MoDOT Test Methods]]''' ...OT test methods utilized by MoDOT and information regarding non-MoDOT test methods used for materials acceptance. ...

The purpose of this test method is to outline the process and procedure for making and testing Wet T ===106.3.2.86.1 Definitions=== ...

==106.3.2.95.1 Scope== ...t emulsion can become water resistant. This test method is used to measure material runoff caused by a rain effect at different time intervals, allowing the me ...

==106.3.2.92.1 Scope== ...sulfur to sulfate during the Loss on Ignition (LOI) test. The LOI ignited material is tested for SO3, subtracted from the initial SO3 and divided by a factor ...

==106.3.2.46.1 Reagents and Apparatus== ==106.3.2.46.2 Procedure== ...

...and acceptance of aggregate used in concrete pavements and masonry. This test method applies to new quarries, new ledges (and combinations of ledges), ex ==106.3.2.93.1 Means of Evaluating Aggregate Alkali Carbonate Reactivity== ...

This test method determines the deleterious content of fine and coarse aggregates. ==106.3.2.71.1 Apparatus== ...

==106.3.2.91.1 Scope== ==106.3.2.91.2 Summary of Method== ...

...catter nuclear test mode and direct transmission mode. Backscatter nuclear test mode should be used for asphaltic concrete mixtures 3-inches or less. Pavin ==106.3.2.41.1 Apparatus== ...

|[[:Category:106 Control of Material|'''Return to Control of Material''']] ==Field Inspection Guidance EPG articles from the former Construction and Materials Manual, Vo ...

==106.3.2.59.1 Equipment== ...rovides a location reference as the vehicle moves longitudinally (see Fig. 106.3.2.59.1). The IP shall also be equipped with an automated triggering system th ...

|[[Media:106.7.81.11 worksheet.gif|EPG 106.3.2.81.11 Worksheet]] ==106.3.2.81.1 Referenced Documents== ...

* ASTM A252 Grade 3 may not be meeting weldable material requirements - updates were made to [[:Category:702_Load-Bearing_Piles#702. ...Concrete]], and [[106.3.2.93_TM-93,_Alkali_Carbonate_Reactivity_Screening|106.3.2.93 TM-93, Alkali Carbonate Reactivity Screening]] will help ensure concrete ...