Category:200 GEOMETRICS: Difference between revisions

From Engineering_Policy_Guide
Jump to navigation Jump to search
← Older editNewer edit →
Smithk (talk | contribs)
Modot, modot
20,986 edits
m article construction - information from General Construction Manual
Smithk (talk | contribs)
Modot, modot
20,986 edits
m removal of General Construction Manual Sec 200; it will be deleted or moved to EPG 203.
Line 12: Line 12:
<categorytree mode=all>237 Contract Plans</categorytree>
<categorytree mode=all>237 Contract Plans</categorytree>
<categorytree mode=all>238 Surveying Activities</categorytree>
<categorytree mode=all>238 Surveying Activities</categorytree>
===Construction Inspection Guidelines for Grading and Removal===
'''General Preparation and Requirements.''' This article not only serves to help personnel assigned to grading and removals but, after reviewing the multitude of their duties and responsibilities, will emphasize the importance of their contribution to the quality of the finished product. This article is a guide to uniform administration, inspection and testing procedures on grading and removal work.
'''Inspector Preparation.'''  It is essential that the inspector have a thorough knowledge of Standard Specifications, special provisions and plans.  The inspector should study all available information regarding the various types of soil.  The inspector must be able to relate each soil type to the standards as it is being placed in the embankment.
'''Daily Documentation.'''  The compaction inspector must keep a diary. The inspector should record weather conditions, condition of material being moved, all activities of the contractor forces, an estimate of quantities completed, any special instructions given the contractor and any other information about the earthwork phase of the work each day. The person making the entry must sign all diary entries.
'''[[:Category:616 Temporary Traffic Control#616.1 Preparation of Traffic Control Plan (TCP)|Traffic Control Plan]]'''.  Enforcement of specific safety measures includes requiring that work be properly barricaded and/or signed in accordance with the Traffic Control Plan included in the contract.  The plan requires that signs be kept clean, legible, in alignment and in good repair.

Revision as of 12:27, 17 April 2007

201 Clearing and Grubbing
214 Rock Fill
230 Alignment of the Roadway
230.1 Horizontal Alignment
230.2 Vertical Alignment
231 Typical Section Elements for Roadways
231.1 Median Width
231.2 Clear Zones
231.3 Lane Width
231.4 Shoulder Width
231.5 Inslope Grade
231.6 Roadside Ditches
231.7 Backslope Grade
231.8 Bridge Width
232 Facility Selection
232.1 Climbing Lanes
232.2 Passing Lanes
232.3 Two - Way Left - Turn Lanes
232.4 Expressways
232.5 Freeways
233 At - Grade Intersections
233.1 At-Grade Intersections - Driveways and Entrances
233.2 At-Grade Intersections with Stop and Yield Control
233.3 Roundabouts
233.4 At-Grade Intersections with Signal Control
234 Interchanges
234.1 Access to Interstate Highways
234.2 Diamond Interchanges
234.3 Directional Interchanges
234.4 Single Point Urban Interchanges (SPUIs)
234.5 Cloverleaf Interchanges
234.6 Diverging Diamond Interchanges
235 Preliminary Plans
236 Right of Way
236.1 General Information
236.2 Right of Way Organization and Personnel
236.3 Administration
236.4 Description Writing and Titles
236.5 Property Management
236.6 Appraisal and Appraisal Review
236.7 Negotiation
236.8 Relocation Assistance Program
236.9 Asbestos Abatement-Removal of Building Improvement
236.10 Right Of Way Condemnation
236.11 Mediation
236.12 Quality Assurance Reviews
236.13 Designing Right of Way Plans
236.14 Change in Route Status Report
236.15 Requests from Cities for Annexations
236.16 Outdoor Advertising
236.17 Junkyards
236.18 Scenic Byways
237 Contract Plans
237.1 Plan Details
237.2 Title Sheet
237.3 Summary and Tabulation of Quantities
237.4 Plan-Profile Sheets
237.5 Special Provisions
237.6 Project Estimates
237.7 Equipment and Materials List
237.8 Contract Time
237.9 Submission of Plans and Supporting Documents
237.10 Distribution of Contract Plans
237.11 Signing and Sealing
237.12 Communication with the Public
237.13 Contract Plan File Name Convention
237.14 Electronic Design Data Delivery (BIM Deliverables)
Where to Find PDM Information in the EPG
238 Surveying Activities
238.1 Aerial Mapping and LiDAR Surveys
238.2 Land Surveying
238.3 Route Surveying
238.4 Construction Surveying

Retrieved from "https://epgtest3.modot.org/index.php?title=Category:200_GEOMETRICS&oldid=9929"