Category:612 Impact Attenuators: Difference between revisions

From Engineering_Policy_Guide
Jump to navigation Jump to search
Smithk (talk | contribs)
m article construction
Smithk (talk | contribs)
WZ information for TMAs added
Line 1: Line 1:
[[image:612 Impact Attenuators.jpg|right|275px|thumb|<center>'''Truck-Mounted Attenuator with a Flashing Arrow Panel'''</center>]]
[[image:612 Impact Attenuators.jpg|right|325px|thumb|<center>'''Truck-Mounted Attenuator with a Flashing Arrow Panel'''</center>]]


This article presents two primary types of impact attenuators:  truck-mounted attenuators and freestanding impact attenuators (sand barrels).  Impact attenuators are designed to absorb energy of an impacting vehicle and reduce the force on a passenger to an acceptable level.  
This article presents two primary types of impact attenuators:  truck-mounted attenuators and freestanding impact attenuators (sand barrels).  Impact attenuators are designed to absorb energy of an impacting vehicle and reduce the force on a passenger to an acceptable level.  
In addition to truck-mounted attenuators (TMAs), warning signs, revolving lights and flashing arrow panels are commonly used with mobile operations.


===612.1 Truck-Mounted Attenuators===
===612.1 Truck-Mounted Attenuators===


Truck-mounted attenuators (TMA) are safety devices to be used for all mobile operations conducted near traffic.  Damaged TMAs are to be removed from service and either repaired or replaced.   
Truck-mounted attenuators (TMA) are safety devices to be used for all mobile operations conducted near traffic.  TMAs are energy-absorbing devices attached to the rear of the trucks used as protective vehicles, thus protecting the motorist and the protective vehicle's driver upon impact.  Damaged TMAs are to be removed from service and either repaired or replaced.   
 
The guidelines  for the use of TMAs are in the table below:


In addition to TMAs, warning signs, revolving lights and flashing arrow panels are commonly used with mobile operations.
====<center>''Table 612.1 Use of TMAs''</center>====
{| border="1" class="wikitable" style="margin: 1em auto 1em auto"
|+
! style="background:#BEBEBE" rowspan="3"|Highway Type !!style="background:#BEBEBE" colspan="3"|Operation Location and Duration 
|-
!style="background:#BEBEBE" colspan="2"|In Lane!!style="background:#BEBEBE" rowspan="2"|On Shoulder and Ramps and at Intersections
|-
!style="background:#BEBEBE"|Mobile!!style="background:#BEBEBE"|Stationary 
|-
|align="center"|Two-lane Undivided||align="center"|Recommended||align="center"|Recommended||align="center"|Recommended
|-
|align="center"|Multi-Lane Undivided||align="center"|Required||align="center"|Recommended||align="center"|Recommended
|-
|align="center"|Multi-Lane Divided||align="center"|Required||align="center"|Required||align="center"|Recommended
|}


===612.2 Sand-Filled Impact Attenuators (Sand Barrels)===
===612.2 Sand-Filled Impact Attenuators (Sand Barrels)===

Revision as of 12:49, 16 March 2007

Truck-Mounted Attenuator with a Flashing Arrow Panel

This article presents two primary types of impact attenuators: truck-mounted attenuators and freestanding impact attenuators (sand barrels). Impact attenuators are designed to absorb energy of an impacting vehicle and reduce the force on a passenger to an acceptable level.

In addition to truck-mounted attenuators (TMAs), warning signs, revolving lights and flashing arrow panels are commonly used with mobile operations.

612.1 Truck-Mounted Attenuators

Truck-mounted attenuators (TMA) are safety devices to be used for all mobile operations conducted near traffic. TMAs are energy-absorbing devices attached to the rear of the trucks used as protective vehicles, thus protecting the motorist and the protective vehicle's driver upon impact. Damaged TMAs are to be removed from service and either repaired or replaced.

The guidelines for the use of TMAs are in the table below:

Table 612.1 Use of TMAs

Highway Type Operation Location and Duration
In Lane On Shoulder and Ramps and at Intersections
Mobile Stationary
Two-lane Undivided Recommended Recommended Recommended
Multi-Lane Undivided Required Recommended Recommended
Multi-Lane Divided Required Required Recommended

612.2 Sand-Filled Impact Attenuators (Sand Barrels)

Sand Barrels

This system consists of a group of freestanding plastic barrels configured in increasing weights from the impact point toward the object. Such an array transfers the vehicle’s momentum to the increasing masses of sand in the barrels and provides a gradual deceleration. Each barrel is designed with a specific weight of sand to absorb the energy of an errant vehicle. Sand barrels are the preferred crash cushions for concrete traffic barrier, and are used when sufficient width is available for their placement. Refer to Standard Plan 612.20 for details. When specified, quantities are calculated and shown on the plans. No direct payment is made for the Type 1 object marker on the lead module. An estimate for replacement barrels needs to be included as a separate pay item, typically calculated as one for every ten barrels.

Sand barrels are most often used to shield fixed objects that cannot be removed or relocated. Sand barrels are recommended for temporary usage such as in work zones. A benefit/cost analysis is to be conducted before sand barrels are used in a permanent application.

An approved sand-filled impact attenuator may be installed on the exposed end of the barrier where the posted speed prior to construction on an existing facility or the anticipated posted speed of a temporary facility is greater than 35 mph. A crash cushion will be required on the upstream end for divided facilities, and on both ends for all two-way facilities. (Crash cushions are discussed in 616.6, Lighting Devices. Applicable pay items are included in the plans.

Proprietary Crash Cushions are alternate crash cushions that may be used when sufficient width is not available for sand barrels. These are typically used on the ends of temporary two-lane, two-way sections on divided highways. More information on proprietary crash cushions is available at 617.1.4 Crash Cushion.