801.2 Laboratory Testing Guidelines for Sec 801: Difference between revisions

From Engineering_Policy_Guide
Jump to navigation Jump to search
Smithk (talk | contribs)
m updated link
Smithk (talk | contribs)
m updated link
Line 1: Line 1:
This article establishes procedures for Laboratory testing and reporting samples of liquid fertilizer. Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec0801.pdf Sec 801] for MoDOT’s specifications.
This article establishes procedures for Laboratory testing and reporting samples of liquid fertilizer. Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=12 Sec 801] for MoDOT’s specifications.


==801.2.1 Sample Procedure==
==801.2.1 Sample Procedure==

Revision as of 07:34, 14 June 2016

This article establishes procedures for Laboratory testing and reporting samples of liquid fertilizer. Refer to Sec 801 for MoDOT’s specifications.

801.2.1 Sample Procedure

Samples of these materials as received in the Laboratory shall be thoroughly mixed and a representative sample taken.

801.2.2 Testing Procedure

Liquid fertilizer shall be tested according to the following methods:

a) Nitrogen (N) in liquid form, MoDOT Test Method TM29
b) Phosphoric Acid (P205) in liquid form - AOAC, seventh edition 1950, gravimetric method, Sec. 2.8 - 2.10
c) Potash (K20) in liquid form, MoDOT Test Method TM28.

All test data and calculations shall be recorded in Laboratory workbooks. Test results shall then be recorded through SiteManager.

801.2.3 Sample Record

The sample record shall be completed in SiteManager, as described in Sample Record General Information , and shall indicate acceptance, qualified acceptance or rejection. Appropriate remarks, as described in EPG 106.20 Reporting, are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate template under the Tests tab.