801.2 Laboratory Testing Guidelines for Sec 801: Difference between revisions
info from lab manual |
m article construction |
||
| Line 18: | Line 18: | ||
==801.2.3 Sample Record== | ==801.2.3 Sample Record== | ||
The sample record shall be completed in SiteManager, as described in [ | The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance or rejection. Appropriate remarks, as described in [[106.9 Reporting Test Results|106.9 Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate template under the Tests tab. | ||
[[Category:801 Lime and Fertilizer]] | [[Category:801 Lime and Fertilizer]] | ||
Revision as of 10:16, 21 February 2008
This article establishes procedures for Laboratory testing and reporting samples of liquid fertilizer. Refer to Sec 801 for MoDOT’s specifications.
801.2.1 Sample Procedure
Samples of these materials as received in the Laboratory shall be thoroughly mixed and a representative sample taken.
801.2.2 Testing Procedure
Liquid fertilizer shall be tested according to the following methods:
- a) Nitrogen (N) in liquid form, MoDOT Test Method TM29
- b) Phosphoric Acid (P205) in liquid form - AOAC, seventh edition 1950, gravimetric method, Sec. 2.8 - 2.10
- c) Potash (K20) in liquid form, MoDOT Test Method TM28.
All test data and calculations shall be recorded in Laboratory workbooks. Test results shall then be recorded through SiteManager.
801.2.3 Sample Record
The sample record shall be completed in SiteManager, as described in Automation Section 3510, and shall indicate acceptance, qualified acceptance or rejection. Appropriate remarks, as described in 106.9 Reporting Test Results, are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate template under the Tests tab.