642.12 Pedestrians and Roundabouts: Difference between revisions
Jump to navigation
Jump to search
Per DE, please closely read the article since most of the article has been re-written. EPG 642.1 through EPG 642.5 have been slightly revised and renumbered as EPG 642.8 through EPG 642.12. |
m Smithk moved page 642.14 Pedestrians and Roundabouts to 642.12 Pedestrians and Roundabouts |
(No difference)
| |
Latest revision as of 09:36, 20 March 2020
Important roundabout design features for pedestrian safety and access are shown in Figure 642.12.
Most pedestrians can look for a gap and cross one leg at a time in single lane roundabouts. However, all roundabouts pose problems for visually impaired pedestrians because crosswalk locations are not apparent and circulating traffic masks the sound cues that visually impaired pedestrians use to analyze crossings.
Multi-lane roundabouts add multiple risks for all pedestrians to cross. Vehicles speeds are higher and gaps more infrequent. Possible solutions to improve access for pedestrians in roundabouts are:
- Provide audible or tactile cues to indicate crossing location.
- Provide good sight distances between pedestrians and motorists.
- Set sidewalks back to guide users to the crosswalks.
For more information on roundabouts refer to EPG 233.3 Roundabouts.