1047.9 Laboratory Testing Guidelines for Sec 1047: Difference between revisions

From Engineering_Policy_Guide
Jump to navigation Jump to search
← Older editNewer edit →
EPGsysop (talk | contribs)
Editor, Bureaucrats, modot, Administrators
1,745 edits
No edit summary
Smithk (talk | contribs)
Modot, modot
20,986 edits
m updated link
Line 1: Line 1:
This article establish procedures for laboratory testing and reporting samples of corrugated polyethylene culvert pipe. Refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1047] for MoDOT’s specifications.  
This article establish procedures for laboratory testing and reporting samples of corrugated polyethylene culvert pipe. Refer to [https://www.modot.org/missouri-standard-specifications-highway-construction Sec 1047] for MoDOT’s specifications.  


==1047.9.1 Procedure==
==1047.9.1 Procedure==

Revision as of 11:57, 17 October 2018

This article establish procedures for laboratory testing and reporting samples of corrugated polyethylene culvert pipe. Refer to Sec 1047 for MoDOT’s specifications.

1047.9.1 Procedure

Tests consist of workmanship, pipe dimensions, pipe stiffness, pipe flattening, brittleness, and environmental stress cracking. All tests shall be conducted in accordance with AASHTO M 294.

1047.9.2 Sample Record

The sample record shall be completed in SiteManager, as described in Sample Record General Information , and shall indicate acceptance, qualified acceptance or rejection. Appropriate remarks, as described in EPG 106.20 Reporting, are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

Retrieved from "https://epgtest3.modot.org/index.php?title=1047.9_Laboratory_Testing_Guidelines_for_Sec_1047&oldid=44043"