Category:1063 Temporary Traffic Control Devices: Difference between revisions
m →1063.4 Report: article construction |
m article construction |
||
| Line 8: | Line 8: | ||
==1063.3 Basis of Acceptance== | ==1063.3 Basis of Acceptance== | ||
All temporary traffic control devices that appear to be specification compliant are accepted on certification. Some materials may be on a qualified list that can be used as a basis for acceptance. Please refer to [[106.17 Product | All temporary traffic control devices that appear to be specification compliant are accepted on certification. Some materials may be on a qualified list that can be used as a basis for acceptance. Please refer to [[106.17 Product Requirements for Temporary Traffic Control Devices, Pavement Marking and Delineation|106.17 Product Requirement for Temporary Traffic Control Devices, Pavement Marking and Delineation]] for additional detail. | ||
==1063.4 Report== | ==1063.4 Report== | ||
| Line 15: | Line 15: | ||
Distribution of reports for temporary traffic control devices purchased under a | Distribution of reports for temporary traffic control devices purchased under a | ||
MoDOT purchase order is to be as described in [[ | MoDOT purchase order is to be as described in [[:Category:1101 Materials Purchased by a Department Purchase Order|1101 Materials Purchased by a Department Purchase Order]]. | ||
Revision as of 08:10, 4 September 2007
This article establishes procedures for inspecting and acceptance of temporary traffic control devices. Refer to Sec 1063 for MoDOT’s specifications.
1063.1 Apparatus
No apparatus is necessary for field evaluation.
1063.2 Procedure
All temporary traffic control devices are to be manufactured as shown on the plans and as specified, in accordance with MUTCD requirements and be NCHRP 350 compliant. Nominal dimensions will be permitted for dimensional lumber where applicable. All temporary traffic control devices should exhibit good workmanship and should be free of objectionable marks or defects that affect appearance or serviceability. The brand name or model number is to be permanently identified on each traffic control device. For specific material requirements for each device, refer to Sec 1063.
1063.3 Basis of Acceptance
All temporary traffic control devices that appear to be specification compliant are accepted on certification. Some materials may be on a qualified list that can be used as a basis for acceptance. Please refer to 106.17 Product Requirement for Temporary Traffic Control Devices, Pavement Marking and Delineation for additional detail.
1063.4 Report
Since all temporary traffic control devices are accepted on certification and visual inspection by Construction personnel although Material inspectors may be asked to assist them, Construction is responsible for reporting all devices through SiteManager.
Distribution of reports for temporary traffic control devices purchased under a MoDOT purchase order is to be as described in 1101 Materials Purchased by a Department Purchase Order.