Category:1059 Protective Coating Material: Difference between revisions
m →1059.2.1 Qualified Lists: article construction |
m article construction |
||
| Line 151: | Line 151: | ||
==1059.3 Report== | ==1059.3 Report== | ||
If the material is accepted in the field, it is reported through SiteManager. The form should show all pertinent information regarding the material and the certification is retained in the district office. The report is to indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106. | If the material is accepted in the field, it is reported through SiteManager. The form should show all pertinent information regarding the material and the certification is retained in the district office. The report is to indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting Test Results|106.9 Reporting Test Results]], are to be included in the report to clarify conditions of acceptance or rejection. | ||
Revision as of 08:07, 4 September 2007
This article establishes procedures for inspecting, accepting and reporting of protective coating for concrete bents and piers (urethane and epoxy), concrete and masonry protective systems, sacrificial graffiti protection system and temporary coating for concrete bents and piers (weathering steel). Refer to Sec 1059 for MoDOT’s specifications.
1059.1 Apparatus
Appropriate sampling thief and sample cans.
1059.2 Procedure
1059.2.1 Qualified Lists
Lists of qualified manufacturers and brand names of protective coating for concrete bents and piers (urethane and epoxy), concrete and masonry protective systems, sacrificial graffiti protection system and temporary coating for concrete bents and piers (weathering steel) is maintained by Construction and Materials. These lists are Tables 1059.2.1, 1059.2.2, 1059.2.3, 1059.2.4 and 1059.2.5.
Table 1059.2.1 Qualified Protective Coating for Concrete Bents and Piers (Urethane) (1059PCCBPR)
| Brand Name | Manufacturer |
|---|---|
| C.I.M. 1000 (Trowel Grade) (5/01) | C.I.M. Industries, Inc.,
94 Grove Street, Peterborough, NH 03458 |
| Futura-Flex 520 HB (10/95) | Futura Coatings, Inc.
9200 Latty Ave. Hazelwood, MO 63042 |
| Futura-Flex 521 HB | Futura Coatings, Inc.
9200 Latty Ave. Hazelwood, MO 63042 |
| Mark 68.1 | Poly-Carb Co.
33095 Bainbridge Rd. Cleveland, OH 44139 |
| Tapco H-550 | Pecora Corporation
165 Wambold Rd. Harleysville, PA 19438 |
| Vulkem 925 | MAMECO International, Inc.
4475 E. 175th St. Cleveland, OH 44128 |
| If a manufacturer requests to have material added to the list of qualified Protective Coating for Concrete Bents and Piers (urethane), refer to the requirements of Sec 1059.10.5. Following the testing and evaluation, satisfactory products will be placed on the list of Protective Coating for Concrete Bents and Piers (urethane). | |
Table 1059.2.2 Qualified Protective Coating for Concrete Bents and Piers (Epoxy) (1059PCECBP)
| Brand Name | Manufacturer |
|---|---|
| Horseyset.WD / Water Dispersed Epoxy | Watson/Bowman - Acme
95 Pine View Drive Amherst, NY 14228 |
| Carboline Multi-gard 954 Concrete Coating (10/95) | Carboline Co.
350 Hanley Industrial Ct. St. Louis, MO 63144 |
| Pilgrim Plastic | Pilgrim Permocoat, Inc.
402 S 22nd Street. Tampa, FL 33605 |
| If a manufacturer requests to have material added to the list of qualified Protective Coating for Concrete Bents and Piers (epoxy), refer to the requirements of Sec 1059.20.4. Following the testing and evaluation, satisfactory products will be placed on the list of Protective Coating for Concrete Bents and Piers (epoxy). | |
Table 1059.2.3 Qualified Concrete and Masonry Protective Systems (1059PCCCCMPS)
| Brand Name | Manufacturer |
|---|---|
| Weather Seal Siloxane | ProSoCo, Inc.
3741 Greenway Circle Lawrence, KS 66046 |
| ENVIROSEAL 77 for Brick | Harris Specialty Chemicals, Inc.
10245 Centurion Pkwy. N. Jacksonville, FL 32256 |
| Rain Stopper 110 | Textured Coatings of America
4101 Ravenswood Road – Suite 101A Fort Lauderdale, FL 33312 |
| Rain Stopper 120 | Textured Coatings of America
4101 Ravenswood Road – Suite 101A Fort Lauderdale, FL 33312 |
| Price Siloxane-6.7 | Price Research LTD
3511 Stadium Drive Kansas City, MO 64129 |
| If a manufacturer requests to have material added to the list of qualified Concrete and Masonry Protective Systems, refer to the requirements of Sec 1059.30.3. Following the testing and evaluation, satisfactory products will be placed on the list of Concrete and Masonry Protective Systems. Field approval of this system is also required as detailed in Sec 1059.30.4. | |
Table 1059.2.4 Qualified Sacrificial Graffiti Protection Systems (1059PCSGPS)
| Brand Name | Manufacturer |
|---|---|
| Defacer Eraser Graffiti Control | ProSoCo, Inc.
3741 Greenway Circle Lawrence, KS 66046 |
| Blok-Guard & Graffiti Control II | ProSoCo, Inc.
(04/06) 3741 Greenway Circle Lawrence, KS 66046 |
| Sacrificial Graffiti Guard | Textured Coatings of America
4101 Ravenswood Road – Suite 101A Fort Lauderdale, FL 33312 |
| If a manufacturer requests to have material added to the list of qualified Sacrificial Graffiti Protection Systems, refer to the requirements of Sec 1059.40.3. Following the testing and evaluation, satisfactory products will be placed on the list of Sacrificial Graffiti Protection Systems. Field approval of this system is also required as detailed in Specification Sec 1059.40.4. | |
Table 1059.2.5 Qualified Temporary Coating for Concrete Bents and Piers (Weathering Steel) (1059PCTMWS)
| Brand Name | Manufacturer |
|---|---|
| Sacrificial Graffiti Guard System | Textured Coatings of America
4101 Ravenswood Road – Suite 101A Fort Lauderdale, FL 33312 |
| If a manufacturer requests to have material added to the list of qualified Temporary Coating for Concrete Bents and Piers (weathering steel), refer to the requirements of Sec 1059.50.3. Following the testing and evaluation, satisfactory products will be placed on the list of Qualified Temporary Coating for Concrete Bents and Piers (Weathering Steel). | |
1059.2.2 Basis of Acceptance
1059.2.2.1 Acceptance of Protective Coating for Concrete Bents and Piers (urethane), Protective Coating for Concrete Bents and Piers (epoxy) and Temporary Coating for Concrete Bents and Piers (weathering steel)
Material on the list of qualified Protective Coating for Concrete Bents and Piers (urethane), Protective Coating for Concrete Bents and Piers (epoxy) and Temporary Coating for Concrete Bents and Piers (weathering steel) may be accepted on the basis of manufacturer's certification and random sampling and testing, when deemed necessary. The manufacturer's certification is to be furnished to the receiving district and is to certify that the material supplied is the same composition as originally qualified.
1059.2.2.2 Acceptance of Concrete and Masonry Protective Systems
Material on the list of qualified Concrete and Masonry Protective Systems may be accepted on the basis of manufacturer's certification and random sampling and testing, when deemed necessary. The manufacturer's certification is to be furnished to the receiving district and is to certify that the material supplied is the same composition as originally qualified. This material also requires field approval in accordance with Sec 1059.30.4.
1059.2.2.3 Acceptance of Sacrificial Graffiti Protection Systems
Material on the list of qualified Sacrificial Graffiti Protection Systems may be accepted on the basis of manufacturer's certification and random sampling and testing, when deemed necessary. The manufacturer's certification is to be furnished to the receiving district and is to certify that the material supplied is the same composition as originally qualified. This material also requires field approval in accordance with Sec 1059.40.4.
1059.2.3 Sampling of Protective Coating for Concrete Bents and Piers (urethane), Protective Coating for Concrete Bents and Piers (epoxy), Concrete and Masonry Protective Systems, Sacrificial Graffiti Protection Systems and Temporary Coating for Concrete Bents and Piers (weathering steel)
Take samples any time the certification indicates test results approaching the specification limits or any time that conditions warrant additional inspection. When samples are taken, the sample size is 1 qt. (1 liter) in a screw top can. Use SiteManager and include complete information as to brand name and lot or batch number. The manufacturer's certification for the lot sampled is retained in the district office.
1059.3 Report
If the material is accepted in the field, it is reported through SiteManager. The form should show all pertinent information regarding the material and the certification is retained in the district office. The report is to indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in 106.9 Reporting Test Results, are to be included in the report to clarify conditions of acceptance or rejection.
Articles in "1059 Protective Coating Material"
This category contains only the following page.