Category:715 Vertical Drain at End Bents: Difference between revisions
Jump to navigation
Jump to search
m updated links |
m Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info |
||
| Line 10: | Line 10: | ||
===715.2.3 Report (Records)=== | ===715.2.3 Report (Records)=== | ||
Reports of vertical drain and drainpipe are to be made through | Reports of vertical drain and drainpipe are to be made through AASHTOWARE Project (AWP) and the certifications are to be retained in the district office. | ||
==715.3 Laboratory Testing for Sec 715== | ==715.3 Laboratory Testing for Sec 715== | ||
No additional guidance - refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=11 Standard Specification 715]. | No additional guidance - refer to [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=11 Standard Specification 715]. | ||
Latest revision as of 10:22, 1 October 2021
715.1 Construction Inspection for Sec 715
No additional guidance - refer to Standard Specification 715.
715.2 Materials Inspection for Sec 715
715.2.1 Vertical Drain
Vertical drain will be accepted on the basis of a manufacturer's certification in accordance with Standard Specification 1012.
715.2.2 Drain Pipe
Corrugated metal drainpipe will be accepted in accordance with Standard Specification 1020. Corrugated Polyvinyl Chloride (PVC) drainpipe and Corrugated Polyethylene (PE) drainpipe will be accepted on the basis of the manufacturer's certification and visual inspection in accordance with Standard Specification 1013.
715.2.3 Report (Records)
Reports of vertical drain and drainpipe are to be made through AASHTOWARE Project (AWP) and the certifications are to be retained in the district office.
715.3 Laboratory Testing for Sec 715
No additional guidance - refer to Standard Specification 715.