821.12 Mixing and Handling Guidelines: Difference between revisions

From Engineering_Policy_Guide
Jump to navigation Jump to search
Smithk (talk | contribs)
m Per MT, a minor clarification
Smithk (talk | contribs)
m Per MT, new products with the new 2017 bid have replaced old products
 
Line 39: Line 39:
:With tank half full of water, avoiding any backflow:
:With tank half full of water, avoiding any backflow:


::1. Add Watersoft when necessary
::1. Add water conditioner when necessary


::2. Wettable Powder (WP)  
::2. Wettable Powder (WP)  

Latest revision as of 08:46, 23 February 2017

Definition: Proper mixing, handling and disposing of herbicides.

Where:

1. Near storage facility if possible

2. Near potable water source

Away from agricultural crops

3. Away from high-risk areas

a. Water (ponds, streams, wetlands, etc.)
b. Human populations
c. Agricultural crops
d. Livestock and pets
e. Endangered species
f. Desirable species

Why:

1. To ensure proper application rates

2. To avoid site contamination

3. To minimize waste

Methods:

A. Follow PPE (personal protective equipment) requirements as stated on label.

B. Avoid breathing vapor, spray mist, or dust when mixing or handling.

C. Tank Mixing Order for approved formulations:

With tank half full of water, avoiding any backflow:
1. Add water conditioner when necessary
2. Wettable Powder (WP)
3. Flowable (F)
4. Other dry formulations
5. Emulsifiable Concentrates (EC)
6. Water Soluble Liquids
7. Adjuvants and Surfactants
Finish filling tank so there is no backflow.

D. Wash hands thoroughly with plenty of soap and water after mixing and handling.

E. Follow manufacturer's instructions for cleaning / maintaining PPE.

F. Keep all herbicides in properly labeled containers.

Special Recommendations

A. Read the label

B. Launder contaminated clothing separately.

C. Discard clothing that has been drenched with product concentrate.