748.7 Bridge Reports and Layouts: Difference between revisions

From Engineering_Policy_Guide
Jump to navigation Jump to search
← Older edit
Smithk (talk | contribs)
Modot, modot
20,986 edits
m →‎748.7.3.9.4 GEO File (Stream Crossings): Per Brdige, additional guidance for profile stationing
Smithk (talk | contribs)
Modot, modot
20,986 edits
m EPG 748.7 moved to EPG 747
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
{|style="padding: 0.3em; margin-left:15px; border:1px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="160px" align="right"  
{|style="padding: 0.3em; margin-left:15px; border:2px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="270px" align="center"  
|- 
|'''Forms'''
|-
|-
|[[media:BR 105 R.docx|Form BR 105R]] (Bridge Survey Report)
|'''This article has moved'''
|-
|-
|[[Media:748.7 Figure Example Bridge Profile.pdf|Form 105 Sl]] (Example Bridge Profile)
|EPG 748.7 Bridge Reports and Layouts has moved to [[:Category:747 Bridge Reports and Layouts|EPG 747 Bridge Reports and Layouts]].  The content was revised, as needed.
|-
|[[Media:748.7 Figure Example Stream Crossing Plan.pdf|Form 105 S2]] (Example Stream Crossing Plan)
|-
|[http://epg.modot.mo.gov/forms/DE-Bridge/Structural%20Rehabilitation%20Checklist.xlt Sturctural Rehabilitation Checklist]
|}
 
{|style="padding: 0.3em; margin-left:15px; border:1px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="200px" align="right"
|-
|'''MSE Walls'''
|-
|[[Media:748.7 MSE Wall Sample Plans.pdf|MSE wall sample plans]]
|-
|[[Media:748.7 Request for Soundings.doc|Request for Final Soundings of Structure]]
|}
 
==748.7.1 Purpose==
Bridge surveys prepared and submitted to the Bridge Division by the district provide the basis for preliminary bridge layouts and ultimately for the preparation of bridge plans by the Bridge Division.  Care exercised during the gathering and preparation of bridge survey data will be reflected throughout the life of the proposed bridge.  The hydraulic design of the bridge waterway opening for a stream crossing is almost entirely based upon bridge survey data gathered in the field or from aerial photographs.  Bridge surveys for grade separations should accurately describe geometrics, grades and other pertinent features of the proposed improvement.  When new grade separation structures are to be incorporated with existing facilities or when existing structures are to be widened or rehabilitated, the bridge survey should reflect geometrics and grades of existing facilities as they exist.  Seldom are existing geometrics and grades the same as shown on original design plans.
 
Bridge survey data should include all information regarding the bridge site which will have a bearing on the bridge layout and design.
 
Consulting engineering firms retained by the department to prepare bridge layouts should contact the Bridge Division for additional requirements beyond those listed in this article.
 
==748.7.2 Procedure==
 
===748.7.2.1 Bridge Survey Forms===
Bridge survey data is submitted on standard forms (Forms BR 105 R, 105 Sl and 105 S2) to the Bridge Division.  These forms are available in Word and Microstation.
 
===748.7.2.2 Bridge Memorandum===
Upon receipt of the bridge survey, the Bridge Division will review the bridge survey data and make an in-depth analysis of the proposed crossing.  The analysis will include hydraulic design of the waterway opening for stream crossings, geometric layout for grade separations, economic analysis of structure types and span lengths and investigation of any special features evident from the bridge survey data.  A tentative bridge layout will be prepared.
 
A bridge memorandum will be prepared on the standard form covering the details of the proposed bridge.  Three copies of the bridge memorandum are sent to the district for review and signature.  The district retains one signed copy of the bridge memorandum and returns the remaining signed copies to the Bridge Division for distribution and filing.
 
The bridge memorandum is the instrument which coordinates bridge plan and roadway plan preparation.  If, during the design process, revisions to the bridge memorandum by either the district or the Bridge Division becomes necessary, all parties to the memorandum are to be notified immediately.  The proposed revisions must be agreed to and noted on all copies of the memorandum.
 
===748.7.2.3 Bridge Permits or Approvals by Other Agencies===
 
*Bridge Layout Approval by Organized Drainage District:  Written agreement documenting drainage district approval of the proposed structure layout is to be obtained by the district.
*Railroad Approval of Preliminary Bridge Layout and of Final Bridge Plans:  Written approval from the railroad of proposed structure and of design plans is obtained by the Multimodal Operations Division with the cooperation of the Bridge Division.
*U.S. Corps of Engineers Sec. 404 Permit: Application is initiated by the district, submitted to and further pursued by the Design Division with the cooperation of the Bridge Division.
*U.S. Coast Guard Bridge Permit: When required, application is prepared and submitted by the Bridge Division.
*Utility Relocations or Permits: Agreements are obtained by the district with cooperation, if necessary, of the Design Division and the Bridge Division.
*FHWA Bridge Approvals: When FHWA preliminary bridge layout approval or bridge plan approval is required, written approval is obtained by the Bridge Division.
*Flood Plain Development Permit:  The GHQ Bridge will prepare and submit the application to the State Emergency Management Agency.
*FHWA, Missouri State Historic Preservation Officer (SHPO), Advisory Council on Historic Preservation (ACHP):  Disposition of historically significant bridge to be replaced must be determined.  This disposition will be coordinated by the Preliminary Studies Division.  Preservation of the historic bridge in place (rehabilitated or for alternative uses such as pedestrian walkway) must be considered.
 
==748.7.3 Preparation of Bridge Survey Report==
 
===748.7.3.1 Procedure===
A proper procedure for, and a methodical approach to the analysis and computations for preparation of a bridge survey report will result in a realistic recommendation for the proposed structure. 
 
===748.7.3.2 Accuracy===
Formulas upon which hydraulic calculations are based are approximations which have been developed from model studies, stream gaging and/or statistical analysis.  The hydraulic design formulas therefore are considered to be approximations.  Due to the diverse nature of individual drainage basins, considerable engineering judgment must be exercised in hydraulic design to obtain reasonable and practical results.  Measurements and calculations are made to the accuracy tabulated in the Table "Accuracy for Bridge Survey Measurements and Calculations."
 
For grade separation bridge surveys and structure recommendations, a higher degree of accuracy is possible and necessary.  A thorough analysis of the geometric and survey data for grade separation layouts will lead to realistic structure recommendations and will substantiate the adequacy of the bridge survey data to be submitted to the Bridge Division.
 
{| border="1" class="wikitable" style="margin: 1em auto 1em auto"
|+ '''Accuracy for Bridge Calculations'''
|+ (Stream Crossing)
|-
!style="background:#BEBEBE"|Measurement||style="background:#BEBEBE"|Accuracy
|-
| colspan="2"|'''Drainage Area'''
|-
| Less than 10 mi<sup>2</sup>
| 0.1 mi<sup>2</sup>
|-
| Greater than 10 mi<sup>2</sup>
| 1.0 mi<sup>2</sup>
|-
| colspan="2"|'''Estimated Discharge'''
|-
| Less than 2000 ft<sup>3</sup>/s
| 10 ft<sup>3</sup>/s
|-
| Greater than 2000 ft<sup>3</sup>/s
| 100 ft<sup>3</sup>/s
|-
| colspan="2"|'''Velocities'''
|-
| All
| 0.1 ft/s
|-
| colspan="2"|'''Valley Section'''
|-
| Station
| 1.0 ft
|-
| Area (each increment)
| 1 %
|-
| Wetted Perimeter (each increment)
| 1.0 unit
|-
| colspan="2"|'''Water Surface Elevation'''
|-
| Design High Water Elevation
| 0.1 ft.
|}
 
===748.7.3.3 Design Flood Frequency===
For the design flood frequency to be used for the hydraulic design of bridge openings see [[:Category:748 Hydraulics and Drainage|Hydraulics and Drainage]].
The basic flood frequency is, by definition, the 100 year frequency. All bridge plans must show the estimated discharge, calculated highwater elevation and estimated backwater for the basic flood.
 
===748.7.3.4 Estimating Flood Discharges===
Numerous USGS recording stream gages have been maintained for many years on selected Missouri streams. For bridge sites at or near one of these gages, the gage data is used in estimating discharge. When sufficient years of data have been collected at a stream gage, the data may be statistically analyzed to estimate discharge for the selected design flood frequency.  Gage data is analyzed by the Log-Pearson type III method. A computer program for the analysis is available and, on request, the Bridge Division will perform the analysis and provide discharge estimates to the district.
 
For bridges without nearby USGS stream gages, the methods of estimating discharge given in Hydrologic Analysis are used.
 
===748.7.3.5 Required Freeboard===
The required structure grade elevation is obtained by adding freeboard and superstructure depth to the design highwater elevation.  Freeboard is defined as the vertical distance between the design highwater elevation and the lower limit of the superstructure.  See [[:Category:748 Hydraulics and Drainage|Hydraulics and Drainage]].
 
===748.7.3.6 Bridge Skew===
Bridge skew increases bridge cost and should be avoided whenever possible.  For stream crossings, skew angles of less than 10 degrees are not usually used.  For grade separation structures, skew should be minimized.  For grade separations small skew angles are frequently required where a right angle intersection between the two intersecting facilities is not possible.
 
===748.7.3.7 Grades===
The bridge survey data includes recommended grades across and adjacent to the structure.  If the grades in the vicinity of the structure are to provide balanced grading quantities, the grade and grading quantities are analyzed prior to submitting the bridge survey report to the extent necessary to assure that excessive grade changes will not be necessary.  The approximate depths of various structure types are shown on [[media:748.7 Figure Superstructure Depth Requirements.pdf|Superstructure Depth Requirements]].  The data on this figure, along with the required freeboard or [[#748.7.4.4 Grades|minimum vertical clearances]] for grade separations are used to establish the minimum elevation of the grade across the structure.
 
===748.7.3.8 Widths===
Bridge widths from face to face of curbs are obtained from [[231.8_Bridge_Width|Bridge Width]].
 
===748.7.3.9 Preparation of Bridge Survey Report===
 
====748.7.3.9.1 [[media:BR 105 R.docx|Form BR 105R]] (Bridge Survey Report)====
Applicable portions of this form are filled in completely by the district.
 
*Page 1. The location of the road is described from points which can be readily identified on maps, such as towns or other state routes.  The anticipated means of handling traffic, such as a temporary bridge, is provided.  Data for existing bridge is completed if existing bridge is on or near alignment of proposed bridge.  All lines under high water elevations at proposed bridge site are completed.  The high water elevation at the survey centerline is the proper elevation to show.
 
*Page 2. Information on any improvements near the proposed bridge is provided.  Such improvements may include, but are not limited to, residences, businesses, other buildings and crop fields.  The data for existing bridges need be completed only for bridges within 1000 ft. of the proposed bridge except where this data for structures beyond this distance will obviously be of value.  The "Additional Remarks" space is used for general information relating to the crossing and is not restricted to remarks relating to existing bridges.
 
*Page 3. The descriptive answers on this page are used as a basis for the hydraulic analysis of the crossing by the Bridge Division and should be carefully completed by the district.  The lower water elevation is the lowest water elevation during a year of normal rainfall.  If the crossing is over an organized drainage district ditch, or encroaches on their levees, the data at the bottom of the page is completed.
 
*Page 4. Photographs depicting the site conditions at the time of survey are provided.
 
*Page 5. General Instructions for Bridge Surveys.
 
====748.7.3.9.2 [[Media:748.7 Figure Example Bridge Profile.pdf|Form 105 Sl]] (Example Bridge Profile)====
Profiles are plotted on this form to a preferred scale of 1 in. = 10 ft. (1:100) in each direction.  Three lines of ground profiles, plus the proposed profile grade, are placed on the upper half of this sheet.  The profiles are positioned so that the profile grade will be located near the top of the form.  The area directly below the proposed location of the structure is to be reserved for boring data for structures (See [[Media:748.7 Figure Example Stream Crossing Profile.pdf|Example Stream Crossing Profile]] and [[Media:748.7_Figure_Example_Grade_Separation_Profile.pdf|Example Grade Separation Profile]].  Dual structures require the use of two forms. If a common profile is used for both dual structures, the common profile is shown on both sheets. The profile grade and finish grade under the structure is plotted on this portion of the form. The lower half of the form is used to show the streambed profile. All three valley sections, both typical channel sections, sections under existing bridges, etc are shown on a separate sheet (See [[Media:748.7 Figure Example Channel Sections.pdf|Example Channel Sections]]). These items should be plotted on a horizontal scale of 1 in. = 100 ft. (1:1000) and a vertical scale of 1 in. = 10 ft. (1:100). More than one form may be used to avoid crowding. The proposed profile grade is shown on the survey centerline profiles. The extreme high water elevation is shown on the centerline profile and each of the valley sections. If actual high water elevations are not obtained for each of the valley sections, the high water elevation from the survey centerline is shown at each valley section; however this elevation is adjusted to account for slope of the stream and the distance to each valley section. The adjustment is made by adding or subtracting, as appropriate, the local streambed slope multiplied by the distance along the streambed profile between the valley section and the survey centerline.
 
====748.7.3.9.3 [[Media:748.7 Figure Example Stream Crossing Plan.pdf|Form 105 S2]] (Stream Crossing Plan)====
This form is used to show a plan of the stream crossing, and includes survey alignment, stream meander, topography, contours, location of any known utilities, north point, direction of flow, and datum.  This form is completed to a scale of 1 in. = 100 ft. (1:1000).  Where the extent of the area is such that the entire area cannot be shown on one form at this scale, a scale of 1 in. = 200 ft. (1:2000) may be used.  Additional forms with match lines may be used as required.  The stream meander is shown using a solid line for the high bank and a dashed line for any secondary or low bank.  The contours are shown using a heavier line at 10 ft. (5 m) intervals.  A typical section is shown on this form or Form 105 Sl showing the roadway section at the bridge, including surface width and type, roadbed width, superelevation and widening, and slopes.  The typical section is shown schematically without detailing surface and base thicknesses, etc.
 
====748.7.3.9.4 GEO File (Stream Crossings)====
GEO files contain geographic information that is imported into HEC-RAS to create the geometric portion of the hydraulic model. If survey data is provided for more than one stream, a GEO file is created for each stream. If additional sections or offset profiles are needed beyond what is available in the GEOPAK to HEC-RAS Converter spreadsheet, create multiple GEO files using the same streambed profile.
 
A [http://caddnet/index.php?title=Road_Support_Training#Bridge_Survey GEOPAK to HEC-RAS Converter and tutorial videos] are available. The GEO file(s) and the GEOPAK to HEC-RAS Converter spreadsheet(s) are submitted with the Bridge Survey.
 
The following items are to be included in the GEO File(s) (stationing direction requirements for profiles and sections are based on the stationing directions required by HEC-RAS):
 
:*'''[[238.3 Route Surveying#238.3.37.10 Centerline and Offset Profiles|Centerline and Offset Profiles]]''' - Profile chains created for use in the GEOPAK to HEC-RAS Converter are created so that the stationing in the GEO file will run from left to right when looking downstream. Profile stationing for the GEO file starts at zero and may run the opposite direction of the roadway stationing.
:*'''[[238.3 Route Surveying#238.3.37.11 Streambed Profiles|Streambed Profile(s)]]''' – Stationing for streambed profiles should begin at zero at the downstream end and increase going upstream.
:*'''[[238.3 Route Surveying#238.3.37.12 Valley Sections|Valley Sections]]''' – Stationing for valley sections run from left to right looking downstream.
:*'''[[238.3 Route Surveying#238.3.37.13 Typical Channel Sections|Typical Channel Sections]]''' - Stationing for channel sections run from left to right looking downstream.
:*'''[[238.3 Route Surveying#238.3.37.14 Existing Bridges|Existing Bridges]]''' - Stationing for sections at existing bridges run from left to right looking downstream.
 
===748.7.3.10 Handling Traffic===
If provision is to be made for handling traffic in the immediate vicinity of the structure that will affect the structure in any way, a recommendation for the location of bypasses, and temporary provisions for handling drainage are included on the bridge survey report.
 
===748.7.3.11 Bridge Fencing===
Information on [[607.1 Applications|Fencing Applications]] contains information on where and how to specify fencing on bridges.
 
===748.7.3.12 Submission===
The completed bridge survey report including cover letter, Form BR 105R and the completed drawings (Forms 105 Sl and 105 S2), the geo file(s) containing the Streambed Profile, Centerline and Offset Profiles, Valley Sections Typical Channel Sections and the Existing Bridge section(s), as well as the GEOPAK to HEC-RAS Converter spreadsheet are submitted to the Bridge Division Bridge Survey Processor (PDF and the electronic MicroStation files including all attached references, hard copies optional), with a copy of the letter to the Design Division.  The Bridge Survey Processor may be contacted by email at Bridge Survey Processor@modot.mo.gov.
 
==748.7.4 Grade Separation Reports==
 
===748.7.4.1 Procedure===
Grade separation reports are prepared on [[Media:748.7 Figure Example Bridge Profile.pdf|Form 105 Sl]] and [[Media:748.7 Figure Example Stream Crossing Plan.pdf|Form 105 S2]] by the district. The completed forms are submitted to the Bridge Division by the district similar to the procedure followed on bridge survey reports. A [[Media:748.7 Form Bridge Memorandum.doc|bridge memorandum]] is prepared by the Bridge Division that is handled in the same manner as the memorandum for other bridge survey reports.  Grade separation reports for structures in interchange areas are not submitted until after interchange geometrics are approved.
 
===748.7.4.2 Grade Separation Layout===
Many of the criteria and principles pertaining to the layout of stream crossing bridges are also applicable to grade separation bridges.
 
Bridge length and substructure locations are usually controlled by horizontal and vertical geometrics.  The minimum vertical and horizontal clearances are given in [[#748.7.4.4 Grades|Grades]].
 
For structures spanning freeway type facilities, two-span bridges with semi-deep abutments are used if the required span length does not exceed 135 ft.  The centerline of bearing at the abutment is located midway between the toe of the end slope and the intersection of the end slope with the grade line over the bridge.
 
For highways over railroad grade separations, the minimum bridge length is controlled by a [[Media:748.7 Figure Spill Slope Clearance at Railroads.pdf|theoretical railroad cross section]]. The distance from the track centerline (for multiple tracks, the outside track centerline) to the embankment slope at the elevation of the top of rail is 20 ft.  This distance may be increased up to 8 ft. on one side of the railroad to allow for a railroad off-track maintenance road. The need for the off-track maintenance road must be justified by the presence of an existing road or the railroad must provide evidence of future need for such a road.
 
===748.7.4.3 Information Necessary===
Form BR 105R is not required for grade separation reports. Forms 105 Sl and 105 S2 for grade separation reports include typical sections for both roads adjacent to the structure, the location of survey centerline and profile grade on the typical sections, and ramp details that will affect the structure, including the location of ramp base line, ramp surface type and width, and roadbed width. The thruway profile is indicated on Form 105 Sl for a distance of at least 500 to 1000 ft. on each side of the proposed intersection. The crossroad profile is indicated on this form for a distance of at least 500 ft. each side of the intersection. Contours are required for Form 105 S2, only where the structure is skewed more than 50 degrees and the natural ground elevation varies more than 10 ft. within the limits of the structure. Where contours are required, they extend to a minimum radial distance of 500 ft. from the intersection. If contours are not required, cross sections are submitted along both roads to beyond the limits of the structure. Other data required on grade separation reports, such as topography and offset profiles, are the same as the requirements for other bridge survey reports. Where the grade separation structure is over an existing pavement or railroad, the grade separation report includes [[238.3 Route Surveying#238.3.36 Grade separation|cross sections or profiles]] along the pavement or railroad to the extent required. Where cross sections are submitted in lieu of profiles, the cross sections show the elevation of the pavement centerline and edges or the elevation of the railroad rails. When skewed grade separations over railroads are involved, an [[Media:748.7 Figure Example Skewed Grade Separation Profile over Railroad.pdf|additional profile sheet]] on Form 105 Sl is to be included with the bridge survey report and preliminary layout. This additional sheet is to show the cross section at right angles to the railroad at the intersection of the centerline of the roadway of the structure and centerline of tracks. If multiple tracks are involved, the centerline of any main line track may be used. In cases of dual structures, separate cross sections are required for each structure. The cross section is to show railroad roadbed, rails, ditches, etc. All of this information is to be plotted within the upper half of the sheet. This sheet will be submitted to the railroad with the bridge layouts instead of the regular Form 105 Sl which shows the three profiles and sections parallel with our centerline. The [[Media:748.7_Figure_Example_Bridge_Survey_Plat.pdf|bridge survey plat sheet]] (Form 105 S2) is to show a line at right angles to the railroad at the location of the cross sections. The zero or 0+00 (0+000) point of the cross section is to be at or near the railroad right of way line and the direction in which the section is taken clearly shown.  For examples of Forms 105 Sl and 105 S2 see:
 
:[[Media:748.7 Figure Example Grade Separation Profile without Borings.pdf|Example Grade Separation Profile without Borings]] (Form 105 S1)
:[[Media:748.7 Figure Example Grade Separation Profile.pdf|Example Grade Separation Profile]] (Form 105 S1)
:[[Media:748.7 Figure Example Grade Separation Profile over Railroad.pdf|Example Grade Separation Profile over Railroad]] (Form 105 S1)
:[[Media:748.7 Figure Example Skewed Grade Separation Profile over Railroad.pdf|Example Skewed Grade Separation Profile over Railroad]] (Form 105 S1)
:[[Media:748.7 Figure Example Grade Separation Plan.pdf|Example Grade Separation Plan]] (Form 105 S2)
:[[Media:748.7_Figure_Example_Bridge_Survey_Plat.pdf|Example Bridge Survey Plat over Railroad]] (Form 105 S2)
 
===748.7.4.4 Grades===
Grades to the limits of the profiles are included on the report for the thruway and the crossroad.  If the grades are to provide balanced grading quantities, the same care as required for bridge survey reports is exercised.  [[media:748.7 Figure Superstructure Depth Requirements.pdf|Superstructure depth requirements]] are used along with the Minimum Vertical Clearances Table to establish the relation of the grades at the intersection where minimum clearances control.
 
The following values are to be used for construction of new structures.  Please note that the minimum vertical clearance value of 16 ft. 6 in. used in the first table is based upon the "required" minimum vertical clearance of 16 ft., plus 6 in. to accommodate future resurfacing of the roadway.
 
{|border="1" class="wikitable" style="margin: 1em auto 1em auto"
|+ '''Minimum Vertical Clearances for Grade Separation Structures'''
|-
!style="background:#BEBEBE"|Facility Under Structure||style="background:#BEBEBE"|Clearance
|-
| Interstate and Principal Arterial Routes || 16 ft. 6 in. (incl. shoulders) 
|-
| Other State Routes > 1700 vpd || 16 ft. 6 in. (incl. shoulders)
|-
| Other State Routes < 1700 vpd* || 15 ft. 6 in. (incl. shoulders)
|-
| Other Streets and Roads* || 14 ft. 6 in. (does not incl. shoulders)
|-
| Railroads** || 23 ft. 0 in.
|-
| colspan="2" | *To provide continuity of travel for taller vehicles exceptions can be made both rural and urban for any routes connecting to the systems where taller vehicles are allowed but not to exceed 16 ft. 6 in. A minimum vertical clearance of 15 ft. 6 in. is required for bridges located in commercial zones. A minimum vertical clearance of 17 ft. 6 in. is required for pedestrian overpass facilities.
|-
| colspan="2" | **For minimum clearances during construction, see [[751.5 Standard Details|Standard Details]] for bridges.
|}
 
{|border="1" class="wikitable" style="margin: 1em auto 1em auto"
|+ '''Minimum Horizontal Clearances for Grade Separation Structures'''
|-
!style="background:#BEBEBE"|Facility Under Structure||style="background:#BEBEBE"|Clearance
|-
| Interstate, Primary and Urban Routes || 30 ft. 
|-
| Ramps & Auxiliary Lanes || 5 ft. 3 in. from shoulder line
|-
| Other State Routes || 5 ft. 3 in. from shoulder line
|-
| Other Streets and Roads || 5 ft. 3 in. from shoulder line 2 ft. from face of barrier curb
|-
| Railroads* ** || 14 ft. 0 in. & 22 ft. 0 ft. (min.)
|-
| colspan="2" | *Measured from centerline of track.  The minimum clearance of 22 ft. 0 in. to be provided on one side of the track(s) is for off-track maintenance.  If it is not obvious on which side of the track(s) this clearance is provided, a decision should be obtained from railroad's local representative.  Assistance from Multimodal Operations may be required in some situations.  Where narrow median is used, provide 5 ft. 6 in. minimum clearance from edge of traveled lanes to face of columns on median side.
|-
| colspan="2" | **For minimum clearances during construction, see [[751.5 Standard Details|Standard Details]] for bridges.
|}
 
Refer to [[131.1 Design Exception Process#131.1.7 Deficient Vertical Clearances on Interstates|EPG 131.1.7 Deficient Vertical Clearances on Interstates]] for information about coordinating minimum vertical clearance for grade separation structures with the Defense Department.
 
==748.7.5 Bridge Rehabilitation and Miscellaneous Structures==
===748.7.5.1 General===
Surveys for structures other than normal bridges are frequently required. Depending on the nature of the proposed construction, specialized data may be required in addition to the usual bridge survey data. Pre-survey planning is essential to assure that adequate survey data is obtained for the preparation of accurate structure plans. Seldom are existing elevations and dimensions the same as shown on original structure plans.
 
===748.7.5.2 Bridge Rehabilitation Surveys===
Bridge rehabilitation may include widening, redecking, lengthening, repairing or other work necessary to restore an existing bridge to serviceable condition. When bridge rehabilitation of any type is proposed, consideration should be given to total structure rehabilitation. Once the scope of the project is decided, the [http://epg.modot.mo.gov/forms/DE-Bridge/Structural%20Rehabilitation%20Checklist.xlt Structural Rehabilitation Checklist] shall be completed and sent to the Bridge Division Bridge Survey Processor along with any additional descriptions and photographs of deteriorated members.  This will aid the Bridge Division in recommending repairs and in estimating repair costs. The Bridge Survey Processor may be contacted by email at Bridge Survey Processor@modot.mo.gov.
 
Significant historical bridges proposed for rehabilitation will need to have the proposed work coordinated with FHWA, SHPO, and ACHP.  A Memorandum of Agreement (MOA) executed by MoDOT between these three agencies will be required.  The Design Division will coordinate this.
 
The following guidelines should assist in developing bridge rehabilitation survey reports for bridge widening and bridge deck replacement projects.
 
====748.7.5.2.1 Bridge Widening====
*Stationing at bridge ends and at the centerline of each intermediate substructure unit.
*Deck elevations at 10 ft. intervals at the centerline and gutterlines. The centerline elevations may be omitted if high traffic volumes are present and would represent a hazard to survey personnel.
*Substructure bearing beam elevations at each end of each substructure unit.
*Groundline profiles at the centerline of the roadway and right and left at the approximate location of new footings.
*Details of existing geometrics and improvements.
*Profile of existing roadway for 100 ft. &plusmn; from each end of the existing bridge.
 
====748.7.5.2.2 Bridge Deck Replacement====
Field survey elevations are not normally needed for bridge redeckings.
 
===748.7.5.3 Surveys for Retaining Walls and Miscellaneous Structures===
====748.7.5.3.1 Retaining Walls====
Surveys for all retaining walls shall be submitted to the Bridge Division Bridge Survey Processor (Bridge Survey Processor@modot.mo.gov) to determine design features. Sufficient geometric and profile information shall be included on the survey sheets to locate the proposed structure in relation to an adjacent roadway, including right of way and/or permanent easement information which might affect the location of the proposed retaining wall. Existing and proposed ground line profiles immediately in front of and behind the proposed retaining wall shall be part of the required survey. Cross-sections taken at 25 ft. &plusmn; intervals showing existing and proposed sections and location of the proposed retaining wall with respect to the referenced roadway or right of way shall be included when submitting surveys for a retaining wall to be designed by the Bridge Division.
 
Plans for mechanically stabilized earth walls will be developed by the districts unless they go under a bridge. Plans for "L" type retaining walls and "cantilever" type retaining walls will be developed by the Bridge Division. For L and cantilever type retaining walls 5 ft. or less in height, the Bridge Division will furnish typical design sections with reinforcing steel and joint details sufficient for development of remaining details by the district. Plans developed by the district shall include all plan views, elevations, sections and quantities similar to a retaining wall designed by the Bridge Division.
 
When the use of retaining walls along the shoulder line of roadways is required, either in the cut or fill sections, the same type of wall through the entire structure length is preferable rather than incorporating an "L" type at each end when height permits. In fill sections, a concrete safety barrier curb shall be provided and shall be tied into a concrete shoulder as a roadway item. In cut sections, a type B concrete traffic barrier shall be provided as a roadway item and placed against the retaining wall at the shoulder line. Provisions shall be made to attach standard bridge anchor section (thrie beam) to eliminate point obstacles where retaining walls end in cut or fill sections.
 
'''"L" Type Retaining Walls.'''
The "L" type takes its name from being shaped like the letter "L."  The footing of the wall may be placed under the proposed fill or as part of a paved shoulder and may or may not have a concrete safety barrier curb for traffic safety.  Walls greater than 5 ft. in height are to be identified by a bridge number, which can be acquired from the structural resource manager in the Bridge Division.
 
'''"Cantilever" Type Retaining Walls.'''
This is a conventional reinforced concrete type wall supported by a spread footing or pile footing. "Cantilever" type walls greater than 5 ft. in height are to be identified by a bridge number which can be acquired from the structural resource manager in the Bridge Division.
 
'''Mechanically Stabilized Earth (MSE) Wall Systems.'''
Mechanically stabilized earth wall systems consist of a reinforced soil mass placed behind facing units. Types of MSE walls include small block and large block (panel). Information concerning the types, appropriate uses and design of MSE walls can be found in [[751.24 LFD Retaining Walls|EPG 751.24 LFD Retaining Walls]]. Contractors are responsible for performing the design of MSE walls. Only the wall systems shown in the bridge prequalified products listing will be available for use by the contractor. The bridge prequalified products listing is available through the Bridge Division or on MoDOT’s website.
 
Plans for MSE walls will be developed by the District unless they go under a bridge, in which case the Bridge Division will develop the plans.
 
The following table provides an overview of MSE wall design procedure:
 
{| border="1" class="wikitable" style="margin: 1em auto 1em auto"
|-
!style="background:#BEBEBE" text align="center"|Question||style="background:#BEBEBE" text align="center"|Answer
|-
| text align="center"| Exceptions || The Bridge Division will still be responsible for producing the plans for any MSE walls that go under a bridge or act as wingwalls for a bridge.
|-
| text align="center"| Plans || District will prepare plans for each wall. (See [[Media:748.7 MSE Wall Sample Plans.pdf|MSE wall sample plans]]) The latest notes can be found in [[751.50 Standard Detailing Notes|EPG 751.50 Standard Detailing Notes]]. That article should be checked often to ensure you are using the most up-to-date notes.
|-
| text align="center"| Wall Nos. || District will assign each wall a number using a system devised by the Bridge Division (Dx-000x). Each District will need to keep a log of the wall nos. used. This log should include the beginning station and job no. for each wall no. assigned.
|-
| text align="center"| Soundings/Borings || District will submit the [[Media:748.7 Request for Soundings.doc|Request for Final Soundings of Structure]] for each wall to the Geotechnical Director in Central Office. The District Geologist should be copied on this request.
|-
| text align="center"| Excavation Behind the Wall || The excavation behind the walls will continue to be included in the Roadway excavation quantities.
|-
| text align="center"| Special Provisions || A special provision is no longer required for MSE walls. The information needed is in [http://modot.mo.gov/business/standards_and_specs/Sec0720.pdf Sec 720] of the Standard Specifications.
|-
| text align="center"| Pay Items || MSE walls only have one pay item: 720-10.00 Mechanically Stabilized Earth Wall Systems. This is bid per square foot and will now be a Roadway Item when the districts do the plans and a Bridge Item when the Bridge Division does the plans.
|-
| text align="center"| Shop Drawings || Do NOT send to the Bridge Division. They will be signed and sealed by a Missouri PE and the Resident Engineer will handle them like other shop drawings that aren't submitted to Central Office.
|-
| text align="center"| Approved Systems || The Bridge Division will continue to be responsible for reviewing and approving systems from manufacturers.
|-
| text align="center"|Historical Plans || The MSE wall plans will be part of the roadway plans so they will be scanned and saved in the same manner.
|-
| text align="center"|Help || Contact the Bridge Division
|}
 
''When NOT to Use MSE Walls'' - You must have adequate room behind the wall for the reinforcing straps (need horizontal clearance behind the wall of approximately 0.7 times the height). You also can NOT use MSE walls in locations where the underlying soil cannot support the weight of the fill and the wall. This is determined by the District Geologist/Geotechnical Director (rare occurrence).
 
''Minimum Embedment'' - Minimum embedment is defined as the distance between the finished ground line and the top of the leveling pad. It is based on this table (FHWA Demo. #82):
 
{| border="1" class="wikitable" style="margin: 1em auto 1em auto"
|-
!style="background:#BEBEBE" text align="center"|Slope in Front of Wall || style="background:#BEBEBE" text align="center"|Minimum Embedment
|-
| text align="center"| Horizontal || text align="center"| H/20
|-
| text align="center"| 1V:3H || text align="center"| H/10
|-
| text align="center"| 1V:2H || text align="center"| H/7
|}
|}
The absolute minimum embedment is 2 ft. When the soundings are returned from the Geotechnical Director, they will include a minimum embedment necessary for global stability.
====748.7.5.3.2 Other Miscellaneous Structures====
Elevations and geometric data sufficient to develop plans for the proposed structure, including special footings such as for high mast tower lights, should be provided. Any subsurface investigation required will be coordinated by the Bridge Division. Right of way and/or permanent easement limits expected to affect the location or dimensions of the structure should be provided.
====748.7.5.3.3 Guidelines for the Design of Miscellaneous Foundations====
Examples of miscellaneous foundations, other than bridges, requiring geotechnical surveys and specific design are sign trusses, high mast tower lights, etc. The district should submit the following information to the Bridge Division Bridge Survey Processor  (Bridge Survey Processor@modot.mo.gov) when a foundation design is required. Providing this information as outlined below, and in a timely manner, will allow the Bridge Division to produce cost efficient designs and details for structural foundations.
Foundation designs for tubular span supported highway signs will be designed as shown in the standard plans.  Foundation designs for box trusses (i.e., aluminum, butterfly and cantilever, and structural steel) will be determined by the Bridge Division relative to cost-effectiveness.
The Bridge Division personnel will be available to serve as a liaison between the district and involved functional units.
'''Time Period.'''
The Bridge Division will need 22 weeks to design any miscellaneous structure foundations and it is essential that all required information be submitted no later than 22 weeks prior to the due date.  Within this 22 week timeframe, the Soils and Geology Section will need 10-12 weeks to perform the following:
*Put the geotechnical survey into the drilling schedule.
*Allow time for inclement weather conditions.
*Drill and sample the foundation materials.
*Perform strength and classification tests on the soil and rock encountered in the drilling operations.
*Interpret the geotechnical data and report findings and recommendations for the foundation design.
'''District Request.'''
Unless a drilled shaft foundation is specifically requested by the district to be the only option considered, the Bridge Division will choose the most cost-efficient foundation (spread footing or drilled shaft foundation). [[:Category:130 Value Engineering|Value engineering]] proposals, after award of the project, for the foundation design will not be considered and will be stated as such in the Bridge special provisions.
'''Layout.'''
The district is to provide stationing and offsets for foundation locations to the Bridge Division so that the miscellaneous foundation layouts can be sent to the Construction and Materials Division with other structure layouts from the Bridge Division. This procedure allows for surveying, utility marking and dispatching of drilling equipment and personnel in the most efficient manner.
'''Geotechnical Report to the Bridge Division.'''
The Construction and Materials Division will provide geotechnical parameters for design of the foundations to the Bridge Division Bridge Survey Processor (Bridge Survey Processor@modot.mo.gov), with a copy to the district.
'''Location and Sign Information Layout.'''
The district will provide detailed information about each structure. The information typically shown on the data sheet and the cross section for each structure in a set of roadway plans is necessary for the proposed foundation design computations.  The quantity for footing and pedestal concrete, normally shown on [[media:D-32.pdf|the D-32]], [[media:D-33.pdf|D-33]] and [[media:D-34.pdf|D-34]] truss data sheets, is not required with this submittal.
'''Bridge Division Design Information Submittal.'''
The district will receive foundation details, quantities and a cost estimate from the Bridge Division to incorporate into the final project design.
==748.7.6 Bridge Survey Aerial Photogrammetry Overlay Procedure==
===748.7.6.1 Purpose===
This procedure is a quick and comprehensive design tool that can be made part of the Bridge Survey submittal package at the consensual agreement of those involved with incorporating and utilizing it on a project-by-project basis.  Therefore, use of this procedure is not required but should be considered as subject to core team discussion prior to submittal of surveys to determine level of interest on the part of both the district Design divisions and Bridge Division.  It is important that any imagery attached to a MicroStation file have the capability of being preferentially turned off at the discretion of the designer(s).
This procedure can provide a more complete representation of the land use around a bridge that is not included in the typical survey information. It can also be used to generate a more accurate hydraulic model. As a time savings tool, the procedure and options provided can reduce guesswork and lengthy preliminary layout and design investigations while visually enhancing unusual terrestrial features combined with complex roadway geometry through the utilization of photogrammetric data.
===748.7.6.2 Guidance===
The economical design of a stream-crossing bridge that satisfies flooding design requirements relies on the extent of the information provided in the Bridge Survey Report drawings that identify the unique nature of the stream, the stream valley and the natural and manmade features that exist within the portion of that valley that is affected by potential flooding.
As a result, an aerial view that shows details of ground cover, structures and public and private improvements for the entire extents of the plat sheet coverage is a very valuable tool that can accurately tie data used for the hydraulic design of the bridge to the specific locations of the physical features that exist in the field near the project.
For situations where accurate and extensive topographic information upstream and downstream of the bridge (as described in EPG 748.7 Bridge Reports and Layout and [http://epg.modot.mo.gov/index.php?title=750.3_Bridges#750.3.2.2_Data_Collection EPG 750.3.2.2 Data Collection]) may not be readily available, an aerial view layer in the MicroStation Bridge Survey plan drawing that is of the same scale as the roadway drawing can be used to support design assumptions, and to better identify the best locations for additional survey data or field investigation, when needed.
For any bridge project, the ability of the designer to use MicroStation’s measuring tools with combined aerial photography and roadway and bridge design geometry supports production of effective and economical design.
Latest mapping should be used with filename and date recorded on/with the image for future reference and historical purposes, or at least noted in the correspondence.
===748.7.6.3 Instructions for Importing Aerial Imagery into MicroStation===
CADD Support Services has provided valuable information on many different procedures related to attaching imagery to a MicroStation file or converting MicroStation geometry to a format that can be viewed inside Google Earth.  As technology improves, CADD Support Services will continue to update this information along with any other CADD related items on the CADD wiki site to have the most up-to-date processes for our MoDOT users. Listed below are some links to the CADD Support wiki site that contain documentation or videos on these procedures.
'''Option 1, [http://caddnet/index.php?title=ArcGIS_CADD_Intergration_Manual Using Web Map Server Imagery]'''
:[http://library.modot.mo.gov/CADD/CADD_Training/MicroStation/ArcGIS_CADD_Intergration/Manual/Chapter_01_GSC_Tools.pdf Geographic Coordinate System & Google Earth Tools]
:[http://library.modot.mo.gov/CADD/CADD_Training/MicroStation/ArcGIS_CADD_Intergration/Manual/Chapter_02_Utilizing_Web_Map_Server_Imagery.pdf Utilizing Web Map Server Imagery]
CADD Support has provided links to available web map servers that contain aerial and quad imagery that can be utilized inside a MicroStation file.  The web map server links are tied to a server with the Missouri Spatial Data Information Service (MSDIS).  The aerial imagery is at 2 ft. pixel resolution. (Quality of aerial imagery depends on pixel resolution which may be different for different areas of the state.  Availability of imagery is dependent upon MSDIS and some areas may not be available or updated yet.) Once the web map imagery has been attached, an image may be created from the web map imagery for the limits of the project.
To use this procedure correctly, a geographic coordinate system will need to be applied to the MicroStation file first so the imagery will lay in correctly with the MicroStation data.
[[image:748.7.6.3 Opt 1.jpg|center|600px]]
'''Option 2, [http://library.modot.mo.gov/CADD/CADD_Training/MicroStation/Misc/ImageryFAQ-2011.htm Using Imagery and USGS Quads with MicroStation]'''
Photogrammetry has provided for MoDOT users aerial and quad imagery that can imported into the MicroStation file.  This imagery normally comes from the Missouri Spatial Data Information Service (MSDIS).  The imagery will have a little better resolution (at 2 ft. pixel resolution) than the Web Map Server imagery.  Keep in mind though that this is 2008 imagery vs. the 2012 imagery from the web map server.
'''Option 3, [http://caddnet/index.php?title=ArcGIS_CADD_Intergration_Manual MicroStation Geometry to Google Earth]'''
:[http://library.modot.mo.gov/CADD/CADD_Training/MicroStation/ArcGIS_CADD_Intergration/Manual/Chapter_01_GSC_Tools.pdf Geographic Coordinate System & Google Earth Tools]
MicroStation has the capability to convert the geometry inside the file into a file format (KML) that can be viewed inside Google Earth. Once the KML has been created, it can be viewed over Google Earth imagery.  The KML file also has the ability to turn on/off levels and references files that were in the MicroStation file when the KML file was created.
 
As with Option 1, a geographic coordinate system will need to be applied to the MicroStation file first before this can be done correctly.
[[image:748.7.6.3 Opt 3.jpg|center|600px]]
'''[http://caddnet/index.php?title=MicroStation_Support_Training#How_To_Videos How To Videos]'''
For Options 1 and 3, there are also some online videos on these procedures that may be helpful.
:*Custom Geographic Coordinate System
:*Exporting MicroStation Geometry to Google Earth (KML)
:*Attaching Web Map Server and Creating Job Image
[[image:748.7.6.3 Videos.jpg|center|600px]]






[[Category:748 Hydraulics and Drainage|748.07]]
[[Category:748 Hydraulics and Drainage|748.07]]

Latest revision as of 14:44, 8 December 2014

This article has moved
EPG 748.7 Bridge Reports and Layouts has moved to EPG 747 Bridge Reports and Layouts. The content was revised, as needed.
Retrieved from "https://epgtest3.modot.org/index.php?title=748.7_Bridge_Reports_and_Layouts&oldid=34817"