642.12 Pedestrians and Roundabouts: Difference between revisions

From Engineering_Policy_Guide
Jump to navigation Jump to search
Smithk (talk | contribs)
m minor clarification
Smithk (talk | contribs)
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[image:642.5.jpg|right|500px|thumb|<center>'''Figure 642.5'''</center>]]
[[image:642.5.jpg|right|500px|thumb|<center>'''Figure 642.12'''</center>]]


Important [[233.3 Roundabouts|roundabout]] design features for pedestrian safety and access are shown in Figure 642.5.   
Important [[233.3 Roundabouts|roundabout]] design features for pedestrian safety and access are shown in Figure 642.12.   


Most pedestrians can look for a gap and cross one leg at a time in single lane roundabouts.  However, all roundabouts pose problems for visually impaired pedestrians because crosswalk locations are not apparent and circulating traffic masks the sound cues that visually impaired pedestrians use to analyze crossings.
Most pedestrians can look for a gap and cross one leg at a time in single lane roundabouts.  However, all roundabouts pose problems for visually impaired pedestrians because crosswalk locations are not apparent and circulating traffic masks the sound cues that visually impaired pedestrians use to analyze crossings.
Line 16: Line 16:




[[category:642 Pedestrian Facilities]]
[[category:642 Pedestrian Facilities|642.12]]

Latest revision as of 09:36, 20 March 2020

Figure 642.12

Important roundabout design features for pedestrian safety and access are shown in Figure 642.12.

Most pedestrians can look for a gap and cross one leg at a time in single lane roundabouts. However, all roundabouts pose problems for visually impaired pedestrians because crosswalk locations are not apparent and circulating traffic masks the sound cues that visually impaired pedestrians use to analyze crossings.

Multi-lane roundabouts add multiple risks for all pedestrians to cross. Vehicles speeds are higher and gaps more infrequent. Possible solutions to improve access for pedestrians in roundabouts are:

  • Provide audible or tactile cues to indicate crossing location.
  • Provide good sight distances between pedestrians and motorists.
  • Set sidewalks back to guide users to the crosswalks.

For more information on roundabouts refer to EPG 233.3 Roundabouts.