106.13 Quality Control/Quality Assurance: Difference between revisions

From Engineering_Policy_Guide
Jump to navigation Jump to search
Smithk (talk | contribs)
m Per CM, for greater clarity,old EPG 106.13 (1389 hits - no appreciable history) was moved to EPG 106.22.
 
Smithk (talk | contribs)
m updated link
 
Line 1: Line 1:
[http://www.modot.mo.gov/business/standards_and_specs/Sec0106.pdf Sec 106.13] provides information for how the Quality Control/Quality Assurance (QC/QA) shall be administered on projects where acceptance of material or work is governed by QC/QA.  Specification requirements and deviation limits for testing of materials are located or are referenced within the material’s respective Standard Specification.
[http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=4 Sec 106.13] provides information for how the Quality Control/Quality Assurance (QC/QA) shall be administered on projects where acceptance of material or work is governed by QC/QA.  Specification requirements and deviation limits for testing of materials are located or are referenced within the material’s respective Standard Specification.




[[category: 106 Control of Material|106.13]]
[[category: 106 Control of Material|106.13]]

Latest revision as of 11:51, 8 June 2016

Sec 106.13 provides information for how the Quality Control/Quality Assurance (QC/QA) shall be administered on projects where acceptance of material or work is governed by QC/QA. Specification requirements and deviation limits for testing of materials are located or are referenced within the material’s respective Standard Specification.