Demolition and Removal of Improvements - Revision history

Hoskir: /* Asbestos Containing Materials */ updated per email from CM

2024-06-25T14:23:23Z

Asbestos Containing Materials: updated per email from CM

← Older revision		Revision as of 09:23, 25 June 2024
Line 35:		Line 35:
	The paragraph below contains language from a [[127.18 Job Special Provisions (JSP) and Contract Documents\|JSP]] that pertains to notification requirements. The time frame for notification is to be included. Note that two, separate 10-day notifications are required, one for demolition and one for removal of ACM.		The paragraph below contains language from a [[127.18 Job Special Provisions (JSP) and Contract Documents\|JSP]] that pertains to notification requirements. The time frame for notification is to be included. Note that two, separate 10-day notifications are required, one for demolition and one for removal of ACM.

	The contractor shall complete the proper notification procedures in accordance with the appropriate federal, state, and local laws and regulations for demolition of structures. The notification procedures and forms are available electronically at ~~http~~://~~www.~~dnr.mo.gov/~~env/apcp/asbestos.htm~~ or you may contact the MDNR’s Air Pollution Control Program at 1-800-361-4827. Notification is necessary at least 10 working days in advance of the start date for removal of asbestos or for the demolition of a building with or without reportable quantities of asbestos present. The contractor shall provide copies of all completed and approved forms to the engineer prior to any demolition work. Special attention should be given to the reporting requirements, since MoDOT can be easily cited for violation.		The contractor shall complete the proper notification procedures in accordance with the appropriate federal, state, and local laws and regulations for demolition of structures. The notification procedures and forms are available electronically at https://dnr.mo.gov/forms-applications or you may contact the MDNR’s Air Pollution Control Program at 1-800-361-4827. Notification is necessary at least 10 working days in advance of the start date for removal of asbestos or for the demolition of a building with or without reportable quantities of asbestos present. The contractor shall provide copies of all completed and approved forms to the engineer prior to any demolition work. Special attention should be given to the reporting requirements, since MoDOT can be easily cited for violation.
	{\| style="margin: 1em auto 1em auto"		{\| style="margin: 1em auto 1em auto"
	\|-		\|-

Smithk: updated broken link

2022-02-18T18:04:41Z

updated broken link

← Older revision		Revision as of 13:04, 18 February 2022
Line 29:		Line 29:
	===Asbestos Containing Materials===		===Asbestos Containing Materials===

	Asbestos removal must be completed prior to demolition of the building. ACM requiring removal will be listed on [[Media:236.13 Form T748.doc\|T-748]] for each parcel inspected. The contract proposal for asbestos removal should use [http://www.modot.mo.gov/business/contractor_resources/biditemslisting.htm standard bid items]. If all of the parcels have not been inspected for ACM, estimated quantities will be used. Check with a [~~http~~://~~wwwi~~/~~design~~/~~default.htm~~ Design] technical support engineer for assistance with this procedure. When quantities of ACM to be removed inside a single structure exceed 35 ft<sup>3</sup>, 160 ft<sup>2</sup> or 260 linear feet (80 m), third party air monitoring is required. A licensed Contractor Supervisor must oversee the abatement.		Asbestos removal must be completed prior to demolition of the building. ACM requiring removal will be listed on [[Media:236.13 Form T748.doc\|T-748]] for each parcel inspected. The contract proposal for asbestos removal should use [http://www.modot.mo.gov/business/contractor_resources/biditemslisting.htm standard bid items]. If all of the parcels have not been inspected for ACM, estimated quantities will be used. Check with a [https://modotgov.sharepoint.com/sites/DE/ Design] technical support engineer for assistance with this procedure. When quantities of ACM to be removed inside a single structure exceed 35 ft<sup>3</sup>, 160 ft<sup>2</sup> or 260 linear feet (80 m), third party air monitoring is required. A licensed Contractor Supervisor must oversee the abatement.

	The project manager will ensure there is close coordination between the district staff concerning right-of-way acquisition, plan development, and contract administration for the removal of all improvements. The environmental specialist can assist with additional resources for hazardous waste screening, materials testing, and contract proposal preparation as needed.		The project manager will ensure there is close coordination between the district staff concerning right-of-way acquisition, plan development, and contract administration for the removal of all improvements. The environmental specialist can assist with additional resources for hazardous waste screening, materials testing, and contract proposal preparation as needed.

Smithk: updated link

2020-08-19T18:34:43Z

updated link

← Older revision		Revision as of 13:34, 19 August 2020
Line 25:		Line 25:
	:*The estimated dates for possession of each parcel and the deadline for needing the inspection report.		:*The estimated dates for possession of each parcel and the deadline for needing the inspection report.

	It is important for the inspectors to have either a contact person in the district that is familiar with the properties or photographs of the buildings taken from the road so a positive identification can be made of each structure requiring inspection. Construction and Materials personnel will take samples of all suspected ACM and painted concrete and will report test results to the district on [[Media:236.13 Form T746.doc\|Forms T-746]], [[Media:236.13 Form T747.doc\|T-747]], and [[Media:236.13 Form T748.doc\|T-748]]. All contract proposals requiring asbestos abatement or demolition of buildings and bridges must include copies of these forms. Only the ACM listed on Form T-748 will be tabulated for removal. If there are questions regarding proper disposal or handling of the material, the district should contact the [http://~~wwwi~~/~~design~~/~~EnvironmentalStudies~~.~~htm~~ Environmental Section of Design] for guidance.		It is important for the inspectors to have either a contact person in the district that is familiar with the properties or photographs of the buildings taken from the road so a positive identification can be made of each structure requiring inspection. Construction and Materials personnel will take samples of all suspected ACM and painted concrete and will report test results to the district on [[Media:236.13 Form T746.doc\|Forms T-746]], [[Media:236.13 Form T747.doc\|T-747]], and [[Media:236.13 Form T748.doc\|T-748]]. All contract proposals requiring asbestos abatement or demolition of buildings and bridges must include copies of these forms. Only the ACM listed on Form T-748 will be tabulated for removal. If there are questions regarding proper disposal or handling of the material, the district should contact the [http://sp/sites/de/environmental_historic_pres/SitePages/Home.aspx Environmental and Historic Preservation Section of Design] for guidance.

	===Asbestos Containing Materials===		===Asbestos Containing Materials===

Smithk: /* Asbestos Containing Materials */ updated link, per SE District resident engineer

2012-10-12T13:14:10Z

Asbestos Containing Materials: updated link, per SE District resident engineer

← Older revision		Revision as of 08:14, 12 October 2012
Line 35:		Line 35:
	The paragraph below contains language from a [[127.18 Job Special Provisions (JSP) and Contract Documents\|JSP]] that pertains to notification requirements. The time frame for notification is to be included. Note that two, separate 10-day notifications are required, one for demolition and one for removal of ACM.		The paragraph below contains language from a [[127.18 Job Special Provisions (JSP) and Contract Documents\|JSP]] that pertains to notification requirements. The time frame for notification is to be included. Note that two, separate 10-day notifications are required, one for demolition and one for removal of ACM.

	The contractor shall complete the proper notification procedures in accordance with the appropriate federal, state, and local laws and regulations for demolition of structures. The notification procedures and forms are available electronically at ~~the following web site location:~~ http://www.dnr~~.state~~.mo.us/~~alpd~~/apcp/~~Asbestos~~.htm or you may contact the MDNR’s Air Pollution Control Program at 1-800-361-4827. Notification is necessary at least 10 working days in advance of the start date for removal of asbestos or for the demolition of a building with or without reportable quantities of asbestos present. The contractor shall provide copies of all completed and approved forms to the engineer prior to any demolition work. Special attention should be given to the reporting requirements, since MoDOT can be easily cited for violation.		The contractor shall complete the proper notification procedures in accordance with the appropriate federal, state, and local laws and regulations for demolition of structures. The notification procedures and forms are available electronically at http://www.dnr.mo.gov/env/apcp/asbestos.htm or you may contact the MDNR’s Air Pollution Control Program at 1-800-361-4827. Notification is necessary at least 10 working days in advance of the start date for removal of asbestos or for the demolition of a building with or without reportable quantities of asbestos present. The contractor shall provide copies of all completed and approved forms to the engineer prior to any demolition work. Special attention should be given to the reporting requirements, since MoDOT can be easily cited for violation.
	{\| style="margin: 1em auto 1em auto"		{\| style="margin: 1em auto 1em auto"
	\|-		\|-

Smithk: Per Environmental, inspection process clarified and simplified

2012-06-11T12:41:54Z

Per Environmental, inspection process clarified and simplified

Smithk: References to ten districts and "District 3", etc. were removed.

2012-05-03T18:10:16Z

References to ten districts and "District 3", etc. were removed.

← Older revision		Revision as of 13:10, 3 May 2012
Line 25:		Line 25:
	:*The estimated dates for possession of each parcel and the deadline for needing the inspection report		:*The estimated dates for possession of each parcel and the deadline for needing the inspection report

	It is important for the inspectors to have either a contact person in the district that is familiar with the properties or photographs of the buildings taken from the road so a positive identification can be made of each structure requiring inspection. Construction and Materials personnel will take samples of all suspected ACM and painted concrete and will report test results to the district on [http://epg.modot.mo.gov/forms/CO/Asbestos%20Survey%20Report%20-%20All%20Suspect%20ACM%20%20(Form%20T746).dot Forms T746], [http://epg.modot.mo.gov/forms/CO/Asbestos%20Survey%20Report%20-%20Nonfriable%20ACM%20(Form%20T747).dot T747], and [http://epg.modot.mo.gov/forms/CO/Asbestos%20Survey%20Report%20-%20All%20Materials%20(Form%20T748).dot T748]. All contract proposals requiring asbestos abatement or demolition of buildings and bridges must include copies of these forms. Only the ACM listed on Form T748 will be tabulated for removal. The environmental specialist in the Design Diviison receives copies of all asbestos/painted concrete, block, and brick inspection forms for all ~~ten~~ districts. These inspection forms are reviewed primarily to determine whether any painted concrete, block or brick surfaces exceed levels allowed for use as clean fill. The environmental specialist will notify the district personnel identified in the memo transmitting the results if there are areas identified in the structure that require disposal in a demolition or sanitary landfill. If a notification is not made, the painted concrete, block, and/or brick (if present) meets the definition of clean fill and can be managed as such, preferably on MoDOT right of way.		It is important for the inspectors to have either a contact person in the district that is familiar with the properties or photographs of the buildings taken from the road so a positive identification can be made of each structure requiring inspection. Construction and Materials personnel will take samples of all suspected ACM and painted concrete and will report test results to the district on [http://epg.modot.mo.gov/forms/CO/Asbestos%20Survey%20Report%20-%20All%20Suspect%20ACM%20%20(Form%20T746).dot Forms T746], [http://epg.modot.mo.gov/forms/CO/Asbestos%20Survey%20Report%20-%20Nonfriable%20ACM%20(Form%20T747).dot T747], and [http://epg.modot.mo.gov/forms/CO/Asbestos%20Survey%20Report%20-%20All%20Materials%20(Form%20T748).dot T748]. All contract proposals requiring asbestos abatement or demolition of buildings and bridges must include copies of these forms. Only the ACM listed on Form T748 will be tabulated for removal. The environmental specialist in the Design Diviison receives copies of all asbestos/painted concrete, block, and brick inspection forms for all the districts. These inspection forms are reviewed primarily to determine whether any painted concrete, block or brick surfaces exceed levels allowed for use as clean fill. The environmental specialist will notify the district personnel identified in the memo transmitting the results if there are areas identified in the structure that require disposal in a demolition or sanitary landfill. If a notification is not made, the painted concrete, block, and/or brick (if present) meets the definition of clean fill and can be managed as such, preferably on MoDOT right of way.

	===Asbestos Containing Materials===		===Asbestos Containing Materials===

Smithk: updated title

2012-04-19T16:17:45Z

updated title

← Older revision		Revision as of 11:17, 19 April 2012
Line 29:		Line 29:
	===Asbestos Containing Materials===		===Asbestos Containing Materials===

	Asbestos removal must be completed prior to demolition of the building. ACM requiring removal will be listed on [http://epg.modot.mo.gov/forms/CO/Asbestos%20Survey%20Report%20-%20All%20Materials%20(Form%20T748).dot T748] for each parcel inspected. The contract proposal for asbestos removal should use [http://www.modot.mo.gov/business/contractor_resources/biditemslisting.htm standard bid items]. If all of the parcels have not been inspected for ACM, estimated quantities will be used. Check with a [http://wwwi/design/default.htm Design] ~~technical support engineer~~ for assistance with this procedure. When quantities of ACM to be removed inside a single structure exceed 160 ft<sup>2</sup> or 260 linear feet (80 m), third party air monitoring is required. The district project manager will coordinate with the environmental specialist to establish a memorandum of understanding with a certified industrial hygienist or equivalent to monitor the abatement, prior to commencement of the work.		Asbestos removal must be completed prior to demolition of the building. ACM requiring removal will be listed on [http://epg.modot.mo.gov/forms/CO/Asbestos%20Survey%20Report%20-%20All%20Materials%20(Form%20T748).dot T748] for each parcel inspected. The contract proposal for asbestos removal should use [http://www.modot.mo.gov/business/contractor_resources/biditemslisting.htm standard bid items]. If all of the parcels have not been inspected for ACM, estimated quantities will be used. Check with a [http://wwwi/design/default.htm Design] Liaison Engineer for assistance with this procedure. When quantities of ACM to be removed inside a single structure exceed 160 ft<sup>2</sup> or 260 linear feet (80 m), third party air monitoring is required. The district project manager will coordinate with the environmental specialist to establish a memorandum of understanding with a certified industrial hygienist or equivalent to monitor the abatement, prior to commencement of the work.

	Once MoDOT has taken possession of a parcel, salvage of any materials or structures will not be permitted until an inspection for asbestos and hazardous waste has been made and all hazardous waste or ACM has been removed. The National Emission Standard for Hazardous Air Pollutants (NESHAP), asbestos regulations of the Environmental Protection Agency, and regulations of the Missouri Department of Natural Resources govern MoDOT operations. The project manager will ensure there is close coordination between the district staff concerning right-of-way acquisition, plan development, and contract administration for the removal of all improvements. The environmental specialist can assist with additional resources for hazardous waste screening, materials testing, and contract proposal preparation as needed.		Once MoDOT has taken possession of a parcel, salvage of any materials or structures will not be permitted until an inspection for asbestos and hazardous waste has been made and all hazardous waste or ACM has been removed. The National Emission Standard for Hazardous Air Pollutants (NESHAP), asbestos regulations of the Environmental Protection Agency, and regulations of the Missouri Department of Natural Resources govern MoDOT operations. The project manager will ensure there is close coordination between the district staff concerning right-of-way acquisition, plan development, and contract administration for the removal of all improvements. The environmental specialist can assist with additional resources for hazardous waste screening, materials testing, and contract proposal preparation as needed.

Smithk: provided links to other EPG articles

2010-06-23T18:02:14Z

provided links to other EPG articles

← Older revision		Revision as of 13:02, 23 June 2010
Line 1:		Line 1:
			{\|border="4" align="right"
			\|-style="background:salmon"
			\|[[127.8 Hazardous and Solid Waste\|'''Return to EPG 127.8 Hazardous and Solid Waste''']]
			\|-style="background:salmon"
			\|[[236.5 Property Management\|'''Return to EPG 236.5 Property Management''']]
			\|}

	When parcels containing buildings, structures, wells, septic tanks, individual lagoons, or other improvements that may remain vacant or unattended for an extended time are acquired, it is necessary to let a contract for demolition and removal of improvements in advance of the general roadway contract. This is done to remove safety hazards, minimize liability and maintain an orderly right of way. Specifications governing this work are contained in [http://www.modot.mo.gov/business/standards_and_specs/Sec0202.pdf Section 202] of the Missouri Standard Specifications for Highway Construction. Demolition and removal activities are made most efficient by grouping together work from various projects within the district into a single contract.		When parcels containing buildings, structures, wells, septic tanks, individual lagoons, or other improvements that may remain vacant or unattended for an extended time are acquired, it is necessary to let a contract for demolition and removal of improvements in advance of the general roadway contract. This is done to remove safety hazards, minimize liability and maintain an orderly right of way. Specifications governing this work are contained in [http://www.modot.mo.gov/business/standards_and_specs/Sec0202.pdf Section 202] of the Missouri Standard Specifications for Highway Construction. Demolition and removal activities are made most efficient by grouping together work from various projects within the district into a single contract.
	[[image:demolition.jpg\|right\|375px]]		[[image:demolition.jpg\|right\|375px]]

Smithk: /* Asbestos Containing Materials */ updated link

2010-06-23T16:07:59Z

Asbestos Containing Materials: updated link

← Older revision		Revision as of 11:07, 23 June 2010
Line 28:		Line 28:
	The paragraph below contains language from a [[127.18 Job Special Provisions (JSP) and Contract Documents\|JSP]] that pertains to notification requirements. The time frame for notification is to be included. Note that two, separate 10-day notifications are required, one for demolition and one for removal of ACM.		The paragraph below contains language from a [[127.18 Job Special Provisions (JSP) and Contract Documents\|JSP]] that pertains to notification requirements. The time frame for notification is to be included. Note that two, separate 10-day notifications are required, one for demolition and one for removal of ACM.

	The contractor shall complete the proper notification procedures in accordance with the appropriate federal, state, and local laws and regulations for demolition of buildings. The notification procedures and forms are available electronically at ~~the following web site location:~~ http://www.dnr~~.state~~.mo.us/~~alpd/apcp~~/Asbestos~~.htm~~ or you may contact the MDNR’s Air Pollution Control Program at 1-800-361-4827. Notification is necessary at least 10 working days in advance of the start date for removal of asbestos or for the demolition of a building with or without reportable quantities of asbestos present. The contractor shall provide copies of all completed and approved forms to the engineer prior to any demolition work. Special attention should be given to the reporting requirements, since MoDOT can be easily cited for violation.		The contractor shall complete the proper notification procedures in accordance with the appropriate federal, state, and local laws and regulations for demolition of buildings. The notification procedures and forms are available electronically at [http://www.dnr.mo.gov/forms/index.html#AirPollution Asbestos NESHAP Notification of Demolition and Renovation, Form--MO 780-1923] (scroll down to this form under "Asbestos (General)") or you may contact the MDNR’s Air Pollution Control Program at 1-800-361-4827. Notification is necessary at least 10 working days in advance of the start date for removal of asbestos or for the demolition of a building with or without reportable quantities of asbestos present. The contractor shall provide copies of all completed and approved forms to the engineer prior to any demolition work. Special attention should be given to the reporting requirements, since MoDOT can be easily cited for violation.
	{\| style="margin: 1em auto 1em auto"		{\| style="margin: 1em auto 1em auto"
	\|-		\|-

Smithk: article construction

2009-10-21T17:53:33Z

article construction

← Older revision		Revision as of 12:53, 21 October 2009
Line 1:		Line 1:
	When parcels containing buildings, structures, wells, septic tanks, individual lagoons, or other improvements that may remain vacant or unattended for an extended time are acquired, it is necessary to let a contract for demolition and removal of improvements in advance of the general roadway contract. This is done to remove safety hazards, minimize liability and maintain an orderly right of way. Specifications governing this work are contained in [http://www.modot.mo.gov/business/standards_and_specs/Sec0202.pdf Section 202] of the Missouri Standard Specifications for Highway Construction. Demolition and removal activities are made most efficient by grouping together work from various projects within the district into a single contract.		When parcels containing buildings, structures, wells, septic tanks, individual lagoons, or other improvements that may remain vacant or unattended for an extended time are acquired, it is necessary to let a contract for demolition and removal of improvements in advance of the general roadway contract. This is done to remove safety hazards, minimize liability and maintain an orderly right of way. Specifications governing this work are contained in [http://www.modot.mo.gov/business/standards_and_specs/Sec0202.pdf Section 202] of the Missouri Standard Specifications for Highway Construction. Demolition and removal activities are made most efficient by grouping together work from various projects within the district into a single contract.
			[[image:demolition.jpg\|right\|375px]]
	The quantities in the proposal need to be tabulated by parcel for each roadway project on the program. It is recommended the district anticipate those parcels that will be acquired within a 12-month period throughout the district and include them in one contract for demolition and removal of improvements. [http://www3.modot.mo.gov/jobspec2.nsf/40d8d12ad121cf2f862567bb004c65ce/aef6cefb61927a3686256a53006449ee?OpenDocument Job Special Provision DSP-99-08D, Demolition and Removal Contract], must be included in demolition and removal contracts when MoDOT does not have possession of all parcels or an asbestos/painted concrete, block and brick inspection has not been completed on all structures prior to letting.		The quantities in the proposal need to be tabulated by parcel for each roadway project on the program. It is recommended the district anticipate those parcels that will be acquired within a 12-month period throughout the district and include them in one contract for demolition and removal of improvements. [http://www3.modot.mo.gov/jobspec2.nsf/40d8d12ad121cf2f862567bb004c65ce/aef6cefb61927a3686256a53006449ee?OpenDocument Job Special Provision DSP-99-08D, Demolition and Removal Contract], must be included in demolition and removal contracts when MoDOT does not have possession of all parcels or an asbestos/painted concrete, block and brick inspection has not been completed on all structures prior to letting.

← Older revision		Revision as of 07:41, 11 June 2012
Line 16:		Line 16:
	It is necessary for all building structures, building remains, and bridges of which MoDOT takes possession to be inspected for the presence of asbestos containing materials (ACM) and heavy-metal-based painted concrete, block, and brick (referred to as “painted concrete”). Heavy-metal based painted concrete, block, and brick are surveyed to determine whether the material can be used as clean fill or if the material requires disposal in a demolition or sanitary landfill. Buildings, building remains/debris, and bridges should be inspected for ACM and painted concrete prior to salvage, demolition, and removal. The inspection methods are invasive and destructive; therefore, the department must have possession before inspection begins. If it is believed there will be salvage of a building by a third party, the request for asbestos/painted concrete, block and brick inspection should stipulate that non-destructive sampling methods be employed.		It is necessary for all building structures, building remains, and bridges of which MoDOT takes possession to be inspected for the presence of asbestos containing materials (ACM) and heavy-metal-based painted concrete, block, and brick (referred to as “painted concrete”). Heavy-metal based painted concrete, block, and brick are surveyed to determine whether the material can be used as clean fill or if the material requires disposal in a demolition or sanitary landfill. Buildings, building remains/debris, and bridges should be inspected for ACM and painted concrete prior to salvage, demolition, and removal. The inspection methods are invasive and destructive; therefore, the department must have possession before inspection begins. If it is believed there will be salvage of a building by a third party, the request for asbestos/painted concrete, block and brick inspection should stipulate that non-destructive sampling methods be employed.

	After MoDOT has taken possession, the district will submit a written request, containing the following information to the State Construction and Materials Engineer for asbestos/painted concrete, block and brick inspection.		After MoDOT has taken possession, the district will submit a written request, containing the following information to the State Construction and Materials Engineer for asbestos/painted concrete, block and brick inspection:
	:*Job Number		:*Job Number
	:*Parcel numbers to be inspected and the total number of parcels on the project requiring building demolition		:*Parcel numbers to be inspected and the total number of parcels on the project requiring building demolition
Line 22:		Line 22:
	:*Plan sheets showing the location of all parcels and structures		:*Plan sheets showing the location of all parcels and structures
	:*A floor plan sketch of all buildings to be inspected, as may be used for appraisal		:*A floor plan sketch of all buildings to be inspected, as may be used for appraisal
	:*The name of the district person to obtain keys from for access		:*The name of the district person to obtain keys from for access and
	:*The estimated dates for possession of each parcel and the deadline for needing the inspection report		:*The estimated dates for possession of each parcel and the deadline for needing the inspection report.

	It is important for the inspectors to have either a contact person in the district that is familiar with the properties or photographs of the buildings taken from the road so a positive identification can be made of each structure requiring inspection. Construction and Materials personnel will take samples of all suspected ACM and painted concrete and will report test results to the district on [~~http~~:~~//epg~~.~~modot.mo.gov/forms/CO/Asbestos%20Survey%20Report%20-%20All%20Suspect%20ACM%20%20(~~Form~~%20T746)~~.~~dot~~ Forms ~~T746~~], [~~http~~:~~//epg~~.~~modot.mo~~.~~gov/forms/CO/Asbestos%20Survey%20Report%20~~-~~%20Nonfriable%20ACM%20(Form%20T747).dot T747~~], and [~~http~~:~~//epg~~.~~modot~~.~~mo.gov/forms/CO/Asbestos%20Survey%20Report%20~~-~~%20All%20Materials%20(Form%20T748).dot T748~~]. All contract proposals requiring asbestos abatement or demolition of buildings and bridges must include copies of these forms. Only the ACM listed on Form ~~T748~~ will be tabulated for removal. ~~The environmental specialist in the Design Diviison receives copies~~ of ~~all asbestos/painted concrete, block, and brick inspection forms for all~~ the ~~districts. These inspection forms are reviewed primarily to determine whether any painted concrete~~, ~~block or brick surfaces exceed levels allowed for use as clean fill. The environmental specialist will notify~~ the district ~~personnel identified in~~ the ~~memo transmitting the results if there are areas identified in the structure that require disposal in a demolition or sanitary landfill~~. ~~If a notification is not made, the painted concrete, block, and/or brick (if present) meets the definition~~ of ~~clean fill and can be managed as such, preferably on MoDOT right of way~~.		It is important for the inspectors to have either a contact person in the district that is familiar with the properties or photographs of the buildings taken from the road so a positive identification can be made of each structure requiring inspection. Construction and Materials personnel will take samples of all suspected ACM and painted concrete and will report test results to the district on [[Media:236.13 Form T746.doc\|Forms T-746]], [[Media:236.13 Form T747.doc\|T-747]], and [[Media:236.13 Form T748.doc\|T-748]]. All contract proposals requiring asbestos abatement or demolition of buildings and bridges must include copies of these forms. Only the ACM listed on Form T-748 will be tabulated for removal. If there are questions regarding proper disposal or handling of the material, the district should contact the [http://wwwi/design/EnvironmentalStudies.htm Environmental Section of Design] for guidance.

	===Asbestos Containing Materials===		===Asbestos Containing Materials===

	Asbestos removal must be completed prior to demolition of the building. ACM requiring removal will be listed on [~~http~~:~~//epg~~.~~modot~~.~~mo.gov/forms/CO/Asbestos%20Survey%20Report%20~~-~~%20All%20Materials%20(Form%20T748).dot T748~~] for each parcel inspected. The contract proposal for asbestos removal should use [http://www.modot.mo.gov/business/contractor_resources/biditemslisting.htm standard bid items]. If all of the parcels have not been inspected for ACM, estimated quantities will be used. Check with a [http://wwwi/design/default.htm Design] ~~Liaison Engineer~~ for assistance with this procedure. When quantities of ACM to be removed inside a single structure exceed 160 ft<sup>2</sup> or 260 linear feet (80 m), third party air monitoring is required. ~~The district project manager will coordinate with the environmental specialist to establish a memorandum of understanding with a certified industrial hygienist or equivalent to monitor~~ the abatement~~, prior to commencement of the work~~.		Asbestos removal must be completed prior to demolition of the building. ACM requiring removal will be listed on [[Media:236.13 Form T748.doc\|T-748]] for each parcel inspected. The contract proposal for asbestos removal should use [http://www.modot.mo.gov/business/contractor_resources/biditemslisting.htm standard bid items]. If all of the parcels have not been inspected for ACM, estimated quantities will be used. Check with a [http://wwwi/design/default.htm Design] technical support engineer for assistance with this procedure. When quantities of ACM to be removed inside a single structure exceed 35 ft<sup>3</sup>, 160 ft<sup>2</sup> or 260 linear feet (80 m), third party air monitoring is required. A licensed Contractor Supervisor must oversee the abatement.

	Once MoDOT has taken possession of a parcel, salvage of any materials or structures will not be permitted until an inspection for asbestos and hazardous waste has been made and all hazardous waste or ACM has been removed. The National Emission Standard for Hazardous Air Pollutants (NESHAP), asbestos regulations of the Environmental Protection Agency, and regulations of the Missouri Department of Natural Resources govern MoDOT operations. The project manager will ensure there is close coordination between the district staff concerning right-of-way acquisition, plan development, and contract administration for the removal of all improvements. The environmental specialist can assist with additional resources for hazardous waste screening, materials testing, and contract proposal preparation as needed.		The project manager will ensure there is close coordination between the district staff concerning right-of-way acquisition, plan development, and contract administration for the removal of all improvements. The environmental specialist can assist with additional resources for hazardous waste screening, materials testing, and contract proposal preparation as needed.

	The paragraph below contains language from a [[127.18 Job Special Provisions (JSP) and Contract Documents\|JSP]] that pertains to notification requirements. The time frame for notification is to be included. Note that two, separate 10-day notifications are required, one for demolition and one for removal of ACM.		The paragraph below contains language from a [[127.18 Job Special Provisions (JSP) and Contract Documents\|JSP]] that pertains to notification requirements. The time frame for notification is to be included. Note that two, separate 10-day notifications are required, one for demolition and one for removal of ACM.

	The contractor shall complete the proper notification procedures in accordance with the appropriate federal, state, and local laws and regulations for demolition of ~~buildings~~. The notification procedures and forms are available electronically at [http://www.dnr.mo.~~gov~~/~~forms~~/~~index~~.~~html#AirPollution Asbestos NESHAP Notification of Demolition and Renovation, Form--MO 780-1923] (scroll down to this form under "Asbestos (General)")~~ or you may contact the MDNR’s Air Pollution Control Program at 1-800-361-4827. Notification is necessary at least 10 working days in advance of the start date for removal of asbestos or for the demolition of a building with or without reportable quantities of asbestos present. The contractor shall provide copies of all completed and approved forms to the engineer prior to any demolition work. Special attention should be given to the reporting requirements, since MoDOT can be easily cited for violation.		The contractor shall complete the proper notification procedures in accordance with the appropriate federal, state, and local laws and regulations for demolition of structures. The notification procedures and forms are available electronically at the following web site location: http://www.dnr.state.mo.us/alpd/apcp/Asbestos.htm or you may contact the MDNR’s Air Pollution Control Program at 1-800-361-4827. Notification is necessary at least 10 working days in advance of the start date for removal of asbestos or for the demolition of a building with or without reportable quantities of asbestos present. The contractor shall provide copies of all completed and approved forms to the engineer prior to any demolition work. Special attention should be given to the reporting requirements, since MoDOT can be easily cited for violation.
	{\| style="margin: 1em auto 1em auto"		{\| style="margin: 1em auto 1em auto"
	\|-		\|-