Category:1009 Aggregate for Drainage - Revision history

Smithk: Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

2021-10-01T17:35:21Z

Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

← Older revision		Revision as of 12:35, 1 October 2021
Line 26:		Line 26:
	===1009.4.1 Types of Samples Tested===		===1009.4.1 Types of Samples Tested===
	====1009.4.1.1 Initial Approval Sample====		====1009.4.1.1 Initial Approval Sample====
	Tests consist of specific gravity, absorption, and Los Angeles abrasion. The minimum time required for completion of tests is four working days from the date received. Test results and calculations shall be recorded through SM.		Tests consist of specific gravity, absorption, and Los Angeles abrasion. The minimum time required for completion of tests is four working days from the date received. Test results and calculations shall be recorded through AWP.

	====1009.4.1.2 Source Approval Sample====		====1009.4.1.2 Source Approval Sample====
	Tests consist of sieve analysis, specific gravity, absorption, Los Angeles abrasion, and deleterious content. The minimum time required for completion of tests is four working days from the date received. Test results and calculations shall be recorded through SM.		Tests consist of sieve analysis, specific gravity, absorption, Los Angeles abrasion, and deleterious content. The minimum time required for completion of tests is four working days from the date received. Test results and calculations shall be recorded through AWP.

	====1009.4.1.3 Production Sample====		====1009.4.1.3 Production Sample====
	Tests consist of sieve analysis and deleterious content. The minimum time required for completion of tests is three working days from the date received. Test results and calculations shall be recorded through SM.		Tests consist of sieve analysis and deleterious content. The minimum time required for completion of tests is three working days from the date received. Test results and calculations shall be recorded through AWP.

	===1009.4.2 Procedure===		===1009.4.2 Procedure===

Smithk: Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

2021-09-16T12:56:48Z

Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

← Older revision		Revision as of 07:56, 16 September 2021
Line 21:		Line 21:

	==1009.3 Records and Reports==		==1009.3 Records and Reports==
	All plant records shown in [[:Category:1001 General Requirements for Material#1001.6 Records and Reports\|EPG 1001.6 General Requirements for Material - Records and Reports]] shall be maintained. The material shall be reported through ~~[http://wwwi/intranet/cm/siteManager.htm SiteManager~~ (SM)] in accordance with [[:Category:101 Standard Forms#Sample Record General ~~Information~~\| Sample Record General ~~Information]] [[image:bulldozer.jpg\|20px~~]].		All plant records shown in [[:Category:1001 General Requirements for Material#1001.6 Records and Reports\|EPG 1001.6 General Requirements for Material - Records and Reports]] shall be maintained. The material shall be reported through AASHTOWARE Project (AWP) in accordance with [[:Category:101 Standard Forms #Sample Record, General\|AWP MA Sample Record, General]].

	==1009.4 Laboratory Testing for Sec 1009==		==1009.4 Laboratory Testing for Sec 1009==
Line 48:		Line 48:

	===1009.4.3 Sample Record===		===1009.4.3 Sample Record===
	The sample record shall be completed in ~~SiteManager, as described~~ in [[:Category:101 Standard Forms#Sample Record General ~~Information~~\| Sample Record General ~~Information]] [[image:bulldozer.jpg\|20px~~]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in AASHTOWARE Project (AWP) in accordance with [[:Category:101 Standard Forms #Sample Record, General\|AWP MA Sample Record, General]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

Smithk: updated link

2018-10-11T20:11:01Z

updated link

← Older revision		Revision as of 15:11, 11 October 2018
Line 3:		Line 3:
	\|'''MGS Information'''		\|'''MGS Information'''
	\|-		\|-
	\|[~~http~~://www.modot.~~mo.gov/business/materials/pdf~~/mgs~~/MGSINDEX.pdf~~ Current General Services Specifications (MGS) By Subject]		\|[https://www.modot.org/general-services-specifications-mgs-subject Current General Services Specifications (MGS) By Subject]
	\|}		\|}

Smithk: updated links

2016-06-15T15:50:28Z

updated links

← Older revision		Revision as of 10:50, 15 June 2016
Line 18:		Line 18:

	==1009.2 Acceptance==		==1009.2 Acceptance==
	Acceptance is based on routine tests in the field to ensure compliance with the requirements of [http://modot.~~mo.gov~~/business/standards_and_specs/~~Sec1009~~.pdf Sec 1009]. Samples are to be taken at destination or at the source of aggregate production by MoDOT inspectors at intervals of one per 2,000 tons.		Acceptance is based on routine tests in the field to ensure compliance with the requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1009]. Samples are to be taken at destination or at the source of aggregate production by MoDOT inspectors at intervals of one per 2,000 tons.

	==1009.3 Records and Reports==		==1009.3 Records and Reports==
Line 45:		Line 45:

	====1009.4.2.4 Deleterious Content====		====1009.4.2.4 Deleterious Content====
	The percentage of deleterious substances in coarse aggregate shall be determined according to [[106.3.2.71 TM-71, Deleterious Content of Aggregate\|TM-71, Deleterious Content of Aggregate]] to meet the quality requirements of [http://modot.~~mo.gov~~/business/standards_and_specs/~~Sec1002~~.pdf Sec 1002]. Where field determinations show a total deleterious content of 2.5 percent or less, including not more than l.0 percent mud balls and shale, the deleterious content is to be inspected visually. The sample is to be tested if visual inspection indicates more than 2.5 percent total deleterious material present in the sample. Source approval samples shall always be tested regardless of the content of deleterious material.		The percentage of deleterious substances in coarse aggregate shall be determined according to [[106.3.2.71 TM-71, Deleterious Content of Aggregate\|TM-71, Deleterious Content of Aggregate]] to meet the quality requirements of [http://www.modot.org/business/standards_and_specs/SpecbookEPG.pdf#page=14 Sec 1002]. Where field determinations show a total deleterious content of 2.5 percent or less, including not more than l.0 percent mud balls and shale, the deleterious content is to be inspected visually. The sample is to be tested if visual inspection indicates more than 2.5 percent total deleterious material present in the sample. Source approval samples shall always be tested regardless of the content of deleterious material.

	===1009.4.3 Sample Record===		===1009.4.3 Sample Record===
	The sample record shall be completed in SiteManager, as described in [[:Category:101 Standard Forms#Sample Record General Information\| Sample Record General Information]] [[image:bulldozer.jpg\|20px]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in SiteManager, as described in [[:Category:101 Standard Forms#Sample Record General Information\| Sample Record General Information]] [[image:bulldozer.jpg\|20px]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

Smithk: /* 1009.1 Procedure */ Per CM, the ITP gives sampling requirements and excel to oracle sheets for reporting material. Thus the Required Field Test tables were removed

2015-03-26T13:07:56Z

1009.1 Procedure: Per CM, the ITP gives sampling requirements and excel to oracle sheets for reporting material. Thus the Required Field Test tables were removed

@@ Line 12: / Line 12: @@
 ==1009.1 Procedure==
 Inspection, testing, and sampling will be governed by the instructions contained in [[:Category:1001 General Requirements for Material|EPG 1001 General Requirements for Material]].
 Samples required for Laboratory tests are as follows:

Smithk: updated links

2013-08-22T13:37:43Z

updated links

← Older revision		Revision as of 08:37, 22 August 2013
Line 11:		Line 11:

	==1009.1 Procedure==		==1009.1 Procedure==
	Inspection, testing, and sampling will be governed by the instructions contained in [[:Category:1001 General Requirements for Material\|General Requirements for Material]].		Inspection, testing, and sampling will be governed by the instructions contained in [[:Category:1001 General Requirements for Material\|EPG 1001 General Requirements for Material]].

	{\| border="1" class="wikitable" style="margin: 1em auto 1em auto"		{\| border="1" class="wikitable" style="margin: 1em auto 1em auto"
Line 21:		Line 21:
	\|Percent Deleterious \|\| SAA001Hx<sup>*</sup> \|\| NEWEST Deleterious 1009 Aggregate		\|Percent Deleterious \|\| SAA001Hx<sup>*</sup> \|\| NEWEST Deleterious 1009 Aggregate
	\|-		\|-
	\|colspan="3" style="background:#FFCC00" \| <sup>*</sup>Test Template numbers have been depicted with a generic ~~‘x’~~ as some templates are updated and the last letter in the template name may change. The most current template for a template sequence should contain ‘NEWEST’ at the beginning of the template name.		\|colspan="3" style="background:#FFCC00" \| <sup>*</sup>Test Template numbers have been depicted with a generic "x" as some templates are updated and the last letter in the template name may change. The most current template for a template sequence should contain ‘NEWEST’ at the beginning of the template name.
	\|}		\|}

	Samples required for Laboratory tests are as follows:		Samples required for Laboratory tests are as follows:
	:(a) Initial Evaluation if material has never been tested before.		:(a) Initial Evaluation if material has never been tested before.
	:(b) Source Approval. Must meet 1002 quality as required in [[:Category:1001 General Requirements for Material#1001.4.2 Source Approval Samples\|General Requirements for Material - Source Approval Samples]].		:(b) Source Approval. Must meet 1002 quality as required in [[:Category:1001 General Requirements for Material#1001.4.2 Source Approval Samples\|EPG 1001.4.2 General Requirements for Material - Source Approval Samples]].

	==1009.2 Acceptance==		==1009.2 Acceptance==
Line 32:		Line 32:

	==1009.3 Records and Reports==		==1009.3 Records and Reports==
	All plant records shown in [[:Category:1001 General Requirements for Material#1001.6 Records and Reports\|General Requirements for Material - Records and Reports]] shall be maintained. The material shall be reported through [http://wwwi/intranet/cm/siteManager.htm SiteManager (SM)] in accordance with [~~http~~:~~//contribute~~.~~modot.mo.gov/business/materials/pdf/vol_3/AS3510.pdf Automation Section 3510~~].		All plant records shown in [[:Category:1001 General Requirements for Material#1001.6 Records and Reports\|EPG 1001.6 General Requirements for Material - Records and Reports]] shall be maintained. The material shall be reported through [http://wwwi/intranet/cm/siteManager.htm SiteManager (SM)] in accordance with [[:Category:101 Standard Forms#Sample Record General Information\| Sample Record General Information]] [[image:bulldozer.jpg\|20px]].

	==1009.4 Laboratory Testing for Sec 1009==		==1009.4 Laboratory Testing for Sec 1009==
Line 59:		Line 59:

	===1009.4.3 Sample Record===		===1009.4.3 Sample Record===
	The sample record shall be completed in SiteManager, as described in [~~http~~:~~//contribute.modot.mo.gov/business/materials/pdf/vol_3/AS3510~~.~~pdf Automation Section 3510~~], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in SiteManager, as described in [[:Category:101 Standard Forms#Sample Record General Information\| Sample Record General Information]] [[image:bulldozer.jpg\|20px]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

Smithk: updated links

2013-02-14T19:50:08Z

updated links

← Older revision		Revision as of 14:50, 14 February 2013
Line 26:		Line 26:
	Samples required for Laboratory tests are as follows:		Samples required for Laboratory tests are as follows:
	:(a) Initial Evaluation if material has never been tested before.		:(a) Initial Evaluation if material has never been tested before.
	:(b) Source Approval. Must meet 1002 quality as required in [[:Category:1001 General Requirements for Material#1001.3.2 Source Approval Samples\|General Requirements for Material - Source Approval Samples]].		:(b) Source Approval. Must meet 1002 quality as required in [[:Category:1001 General Requirements for Material#1001.4.2 Source Approval Samples\|General Requirements for Material - Source Approval Samples]].

	==1009.2 Acceptance==		==1009.2 Acceptance==
Line 32:		Line 32:

	==1009.3 Records and Reports==		==1009.3 Records and Reports==
	All plant records shown in [[:Category:1001 General Requirements for Material#1001.5 Records and Reports\|General Requirements for Material - Records and Reports]] shall be maintained. The material shall be reported through [http://wwwi/intranet/cm/siteManager.htm SiteManager (SM)] in accordance with [http://contribute.modot.mo.gov/business/materials/pdf/vol_3/AS3510.pdf Automation Section 3510].		All plant records shown in [[:Category:1001 General Requirements for Material#1001.6 Records and Reports\|General Requirements for Material - Records and Reports]] shall be maintained. The material shall be reported through [http://wwwi/intranet/cm/siteManager.htm SiteManager (SM)] in accordance with [http://contribute.modot.mo.gov/business/materials/pdf/vol_3/AS3510.pdf Automation Section 3510].

	==1009.4 Laboratory Testing for Sec 1009==		==1009.4 Laboratory Testing for Sec 1009==

Smithk: Per CM, link to AS 3510 updated

2011-07-05T20:03:22Z

Per CM, link to AS 3510 updated

← Older revision		Revision as of 15:03, 5 July 2011
Line 32:		Line 32:

	==1009.3 Records and Reports==		==1009.3 Records and Reports==
	All plant records shown in [[:Category:1001 General Requirements for Material#1001.5 Records and Reports\|General Requirements for Material - Records and Reports]] shall be maintained. The material shall be reported through [http://wwwi/intranet/cm/siteManager.htm SiteManager (SM)] in accordance with [http://~~wwwi~~/~~intranet~~/cm/~~materials~~/vol_3/AS3510.pdf Automation Section 3510].		All plant records shown in [[:Category:1001 General Requirements for Material#1001.5 Records and Reports\|General Requirements for Material - Records and Reports]] shall be maintained. The material shall be reported through [http://wwwi/intranet/cm/siteManager.htm SiteManager (SM)] in accordance with [http://contribute.modot.mo.gov/business/materials/pdf/vol_3/AS3510.pdf Automation Section 3510].

	==1009.4 Laboratory Testing for Sec 1009==		==1009.4 Laboratory Testing for Sec 1009==
Line 59:		Line 59:

	===1009.4.3 Sample Record===		===1009.4.3 Sample Record===
	The sample record shall be completed in SiteManager, as described in [http://~~wwwi~~/~~intranet~~/cm/~~materials~~/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in SiteManager, as described in [http://contribute.modot.mo.gov/business/materials/pdf/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

Smithk: added link

2010-08-30T20:06:10Z

added link

← Older revision		Revision as of 15:06, 30 August 2010
Line 32:		Line 32:

	==1009.3 Records and Reports==		==1009.3 Records and Reports==
	All plant records shown in [[:Category:1001 General Requirements for Material#1001.5 Records and Reports\|General Requirements for Material - Records and Reports]] shall be maintained. The material shall be reported through SiteManager in accordance with [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510].		All plant records shown in [[:Category:1001 General Requirements for Material#1001.5 Records and Reports\|General Requirements for Material - Records and Reports]] shall be maintained. The material shall be reported through [http://wwwi/intranet/cm/siteManager.htm SiteManager (SM)] in accordance with [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510].

	==1009.4 Laboratory Testing for Sec 1009==		==1009.4 Laboratory Testing for Sec 1009==
	===1009.4.1 Types of Samples Tested===		===1009.4.1 Types of Samples Tested===
	====1009.4.1.1 Initial Approval Sample====		====1009.4.1.1 Initial Approval Sample====
	Tests consist of specific gravity, absorption, and Los Angeles abrasion. The minimum time required for completion of tests is four working days from the date received. Test results and calculations shall be recorded through ~~SiteManager~~.		Tests consist of specific gravity, absorption, and Los Angeles abrasion. The minimum time required for completion of tests is four working days from the date received. Test results and calculations shall be recorded through SM.

	====1009.4.1.2 Source Approval Sample====		====1009.4.1.2 Source Approval Sample====
	Tests consist of sieve analysis, specific gravity, absorption, Los Angeles abrasion, and deleterious content. The minimum time required for completion of tests is four working days from the date received. Test results and calculations shall be recorded through ~~SiteManager~~.		Tests consist of sieve analysis, specific gravity, absorption, Los Angeles abrasion, and deleterious content. The minimum time required for completion of tests is four working days from the date received. Test results and calculations shall be recorded through SM.

	====1009.4.1.3 Production Sample====		====1009.4.1.3 Production Sample====
	Tests consist of sieve analysis and deleterious content. The minimum time required for completion of tests is three working days from the date received. Test results and calculations shall be recorded through ~~SiteManager~~.		Tests consist of sieve analysis and deleterious content. The minimum time required for completion of tests is three working days from the date received. Test results and calculations shall be recorded through SM.

	===1009.4.2 Procedure===		===1009.4.2 Procedure===

Smithk: /* 1009.4.3 Sample Record */ updated link

2010-07-01T17:59:17Z

1009.4.3 Sample Record: updated link

← Older revision		Revision as of 12:59, 1 July 2010
Line 59:		Line 59:

	===1009.4.3 Sample Record===		===1009.4.3 Sample Record===
	The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting ~~Test Results~~\|Reporting ~~Test Results~~]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.