903.7 Conventional Road Guide Signs - Revision history

Smithk: Updated website links for increased security

2021-10-26T20:10:45Z

Updated website links for increased security

Smithk: /* 903.7.49 Community Wayfinding Signs (MUTCD Section 2D.50) */ Per TS, as a convenience to cities, provided a simplified document, "Key Wayfinding Requirements"

2021-07-16T15:39:32Z

903.7.49 Community Wayfinding Signs (MUTCD Section 2D.50): Per TS, as a convenience to cities, provided a simplified document, "Key Wayfinding Requirements"

← Older revision		Revision as of 10:39, 16 July 2021
Line 1,041:		Line 1,041:

	==903.7.49 Community Wayfinding Signs ([https://mutcd.fhwa.dot.gov/ MUTCD] Section 2D.50)==		==903.7.49 Community Wayfinding Signs ([https://mutcd.fhwa.dot.gov/ MUTCD] Section 2D.50)==
			{\|style="padding: 0.3em; margin-left:7px; border:2px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="400px" align="right"
			\|-
			\|'''Useful Information for Local Agencies'''
			\|-
			\|[[media:903.7.49 Key Wayfinding.pdf\|'''Key Wayfinding Requirements''']]
			\|-
			\|Includes information about sign posts, the number and placement of wayfinding destinations, the use of arrows, colors, legends, fabrication and retroreflectivity.
			\|}
	'''Support.''' Community wayfinding guide signs are part of a coordinated and continuous system of signs that direct tourists and other road users to key civic, cultural, visitor, and recreational attractions and other destinations within a city or a local urbanized or downtown area.		'''Support.''' Community wayfinding guide signs are part of a coordinated and continuous system of signs that direct tourists and other road users to key civic, cultural, visitor, and recreational attractions and other destinations within a city or a local urbanized or downtown area.

Smithk: updated links

2020-11-13T19:30:51Z

updated links

← Older revision		Revision as of 14:30, 13 November 2020
Line 512:		Line 512:
	Directional assemblies should be located on the near right corner of the intersection. At major intersections and at Y or offset intersections, additional Directional assemblies should be installed on the far right or left corner to confirm the near-side assemblies. When the near-corner position is not practical for Directional assemblies, the far right corner should be the preferred alternative, with oversized signs, if necessary, for legibility. Where unusual conditions exist, the location of a Directional assembly should be determined by engineering judgment with the goal being to provide the best possible combination of view and safety.		Directional assemblies should be located on the near right corner of the intersection. At major intersections and at Y or offset intersections, additional Directional assemblies should be installed on the far right or left corner to confirm the near-side assemblies. When the near-corner position is not practical for Directional assemblies, the far right corner should be the preferred alternative, with oversized signs, if necessary, for legibility. Where unusual conditions exist, the location of a Directional assembly should be determined by engineering judgment with the goal being to provide the best possible combination of view and safety.

	'''Support.''' It is more important that guide signs be readable, and that the information and direction displayed thereon be readily understood, at the appropriate time and place than to be located with absolute uniformity. Refer to [[903.17 Typical Signing Applications\|EPG 903.17 Typical Signing Applications]] for additional information.		'''Support.''' It is more important that guide signs be readable, and that the information and direction displayed thereon be readily understood, at the appropriate time and place than to be located with absolute uniformity. Refer to [[903.16 Typical Signing Applications\|EPG 903.16 Typical Signing Applications]] for additional information.

	==903.7.30 Combination Lane-Use/Destination Overhead Guide Sign ([https://mutcd.fhwa.dot.gov/ MUTCD] Section 2D.33)==		==903.7.30 Combination Lane-Use/Destination Overhead Guide Sign ([https://mutcd.fhwa.dot.gov/ MUTCD] Section 2D.33)==
Line 678:		Line 678:
	==903.7.37 Location of Destination Signs ([https://mutcd.fhwa.dot.gov/ MUTCD] Section 2D.40)==		==903.7.37 Location of Destination Signs ([https://mutcd.fhwa.dot.gov/ MUTCD] Section 2D.40)==

	'''Support.''' Refer to [[903.17 Typical Signing Applications\|EPG 903.17 Typical Signing Applications]] for typical placements of Destination signs.		'''Support.''' Refer to [[903.16 Typical Signing Applications\|EPG 903.16 Typical Signing Applications]] for typical placements of Destination signs.

	==903.7.38 Distance Signs (D2 Series) ([https://mutcd.fhwa.dot.gov/ MUTCD] Section 2D.41)==		==903.7.38 Distance Signs (D2 Series) ([https://mutcd.fhwa.dot.gov/ MUTCD] Section 2D.41)==
Line 713:		Line 713:
	Where, just outside of an incorporated municipality, two routes are concurrent and continue concurrently to the next incorporated municipality, the top name on the Distance sign should be that of the place where the routes separate; the bottom name should be that of the city to which the greater part of the through traffic is destined.		Where, just outside of an incorporated municipality, two routes are concurrent and continue concurrently to the next incorporated municipality, the top name on the Distance sign should be that of the place where the routes separate; the bottom name should be that of the city to which the greater part of the through traffic is destined.

	'''Support.''' [[903.17 Typical Signing Applications\|EPG 903.17 Typical Signing Applications]] shows typical placements of Distance signs.		'''Support.''' [[903.16 Typical Signing Applications\|EPG 903.16 Typical Signing Applications]] shows typical placements of Distance signs.

	==903.7.40 Destination and Distance Signs (D1a Series)==		==903.7.40 Destination and Distance Signs (D1a Series)==

Smithk: /* Table 903.7.4 Guide Sign Sizes */

2020-11-03T19:30:32Z

Table 903.7.4 Guide Sign Sizes

← Older revision		Revision as of 14:30, 3 November 2020
Line 153:		Line 153:
	\|-		\|-
	!Street Name (one line)		!Street Name (one line)
	\|\|D3-1 \|\|[[#903.7.41 Street Name Signs (D-3 Series) (MUTCD Section 2D.43)\|903.7.41]] \|\|Varies \|\|Varies \|\|- \|\|-		\|\|D3-1 \|\|[[#903.7.41 Street Name Signs (D3-1 Series) (MUTCD Section 2D.43)\|903.7.41]] \|\|Varies \|\|Varies \|\|- \|\|-
	\|-		\|-
	!Street Name (two line)		!Street Name (two line)
	\|\|D3-1b \|\|[[#903.7.41 Street Name Signs (D-3 Series) (MUTCD Section 2D.43)\|903.7.41]] \|\|Varies X 18 \|\|Varies X 18 \|\|- \|\|-		\|\|D3-1b \|\|[[#903.7.41 Street Name Signs (D3-1 Series) (MUTCD Section 2D.43)\|903.7.41]] \|\|Varies X 18 \|\|Varies X 18 \|\|- \|\|-
	\|-		\|-
	!Advance Street Name		!Advance Street Name

Smithk: /* 903.7.11 Design of Route Signs (MUTCD Section 2D.11) */

2020-09-29T17:10:24Z

903.7.11 Design of Route Signs (MUTCD Section 2D.11)

← Older revision		Revision as of 12:10, 29 September 2020
Line 286:		Line 286:
	State Numbered Route (M1-5) signs shall consist of black numerals on a white representation of the State of Missouri surrounded by a rectangular black background without a border. (A design detail is provided in Sign Detail) This sign shall be used on all state routes and in connection with route sign assemblies on intersecting highways.		State Numbered Route (M1-5) signs shall consist of black numerals on a white representation of the State of Missouri surrounded by a rectangular black background without a border. (A design detail is provided in Sign Detail) This sign shall be used on all state routes and in connection with route sign assemblies on intersecting highways.

	A 24 in. x 24 in. minimum sign size shall be used for ~~State Numbered~~ route numbers with one or two digits, and a 30 in. x 24 in. minimum sign size shall be used for ~~U.S. State Numbered~~ having three digits.		A 24 in. x 24 in. minimum sign size shall be used for state numbered route numbers with one or two digits, and a 30 in. x 24 in. minimum sign size shall be used for state numbers having three digits.

	State Lettered Route (M1-5a) signs shall be rectangular with the route letter in the center. The legend and border shall be black on a white background.		State Lettered Route (M1-5a) signs shall be rectangular with the route letter in the center. The legend and border shall be black on a white background.

Smithk: /* 903.7.11 Design of Route Signs (MUTCD Section 2D.11) */

2020-09-29T17:07:50Z

903.7.11 Design of Route Signs (MUTCD Section 2D.11)

← Older revision		Revision as of 12:07, 29 September 2020
Line 290:		Line 290:
	State Lettered Route (M1-5a) signs shall be rectangular with the route letter in the center. The legend and border shall be black on a white background.		State Lettered Route (M1-5a) signs shall be rectangular with the route letter in the center. The legend and border shall be black on a white background.

	A 24 in. x 24 in. minimum sign size shall be used for ~~State Lettered~~ routes with one letter and a 30 in. x 24 in. minimum sign size shall be used for ~~State Lettered~~ routes having two letters.		A 24 in. x 24 in. minimum sign size shall be used for state lettered routes with one letter and a 30 in. x 24 in. minimum sign size shall be used for state lettered routes having two letters.

	'''Guidance.''' The letters G, I, L, Q and S should not be used on State Lettered Route signs. The letter R should be used on supplemental routes connecting state parks or other recreational facilities. Usually, but not always, double letter routes are farm to market roads that end at county roads or are former alignments of other highways.		'''Guidance.''' The letters G, I, L, Q and S should not be used on State Lettered Route signs. The letter R should be used on supplemental routes connecting state parks or other recreational facilities. Usually, but not always, double letter routes are farm to market roads that end at county roads or are former alignments of other highways.

Smithk: Per TS, numerous minor clarifications

2020-09-28T15:27:43Z

Per TS, numerous minor clarifications

Show changes

Smithk: /* Table 903.7.51 Approved National Scenic Byways */ Per TS, minor clarification

2020-08-13T15:11:26Z

Table 903.7.51 Approved National Scenic Byways: Per TS, minor clarification

← Older revision		Revision as of 10:11, 13 August 2020
Line 1,161:		Line 1,161:
	Table 903.7.51 lists the approved National Scenic Byways that follow state maintained routes.		Table 903.7.51 lists the approved National Scenic Byways that follow state maintained routes.

	===<center>Table 903.7.51 Approved National Scenic Byways===		===<center>Table 903.7.51 Approved National Scenic Byways in Missouri===
			<center>
	{\| border="1" class="wikitable" style="margin: 1em auto 1em auto" style="text-align:center"		{\| border="1" class="wikitable" style="margin: 1em auto 1em auto" style="text-align:center"
	\|+		\|+
	! style="background:#BEBEBE"\|~~Name of~~ Scenic ~~Byway~~		! style="background:#BEBEBE"\|National Scenic Byways in Missouri
	\|-		\|-
	\|align="left"\|Crowley's Ridge Parkway (~~http~~://www.fhwa.dot.gov/byways/byways/2588)		\|align="left"\|Crowley's Ridge Parkway (https://www.fhwa.dot.gov/byways/byways/2588)
	\|-		\|-
	\|align="left"\|Little Dixie Highway of the Great River Road (~~http~~://www.fhwa.dot.gov/infrastructure/back0406.cfm)		\|align="left"\|Great River Road (https://www.fhwa.dot.gov/byways/byways/2279)
			\|-
			\|align="left"\|Little Dixie Highway of the Great River Road (https://www.fhwa.dot.gov/infrastructure/back0406.cfm)
	\|}		\|}
	</center>		</center>

Smithk: Per TS, numerous minor clarifications

2020-08-06T19:11:38Z

Per TS, numerous minor clarifications

Show changes

Smithk: /* 903.7.3 Color, Retroreflection and Illumination (MUTCD Section 2D.03) */

2020-07-02T13:20:04Z

903.7.3 Color, Retroreflection and Illumination (MUTCD Section 2D.03)

← Older revision		Revision as of 08:20, 2 July 2020
Line 13:		Line 13:
	==903.7.3 Color, [http://www.trafficsign.us/reflidguide.pdf Retroreflection] and Illumination (MUTCD Section 2D.03)==		==903.7.3 Color, [http://www.trafficsign.us/reflidguide.pdf Retroreflection] and Illumination (MUTCD Section 2D.03)==

	'''Support.''' Requirements for illumination, retroreflection and color are stated under the specific headings for individual guide signs or groups of signs. General provisions are provided in [[903.2 Extent of Signing#903.2.7 Types of Fabricated Signs\|EPG 903.2.7]] and [[903.2 Extent of Signing#903.2.9 Retroreflectivity and Illumination (MUTCD Section 2A.08)\|EPG 903.2.9]].		'''Support.''' Requirements for illumination, retroreflection and color are stated under the specific headings for individual guide signs or groups of signs. General provisions are provided in [[903.2 Extent of Signing#903.2.7 Types of Fabricated Signs\|EPG 903.2.7]] and [[903.2 Extent of Signing#903.2.9 Retroreflectivity and Illumination (MUTCD Section 2A.07)\|EPG 903.2.9]].

	'''Standard.''' Except where otherwise provided for individual signs or groups of signs, guide signs on streets and highways shall have a white message and border on a green background. All messages, borders and legends shall be retroreflective and all backgrounds shall be retroreflective or illuminated.		'''Standard.''' Except where otherwise provided for individual signs or groups of signs, guide signs on streets and highways shall have a white message and border on a green background. All messages, borders and legends shall be retroreflective and all backgrounds shall be retroreflective or illuminated.

← Older revision		Revision as of 15:10, 26 October 2021
Line 29:		Line 29:
	==903.7.4 Size of Signs ([https://mutcd.fhwa.dot.gov/ MUTCD] Section 2D.04)==		==903.7.4 Size of Signs ([https://mutcd.fhwa.dot.gov/ MUTCD] Section 2D.04)==

	'''Standard.''' Except as provided in [~~http~~://epg.modot.org/index.php?title=903.2_Extent_of_Signing#903.2.21_Dimensions_.28MUTCD_Section_2A.11.29 EPG 903.2.21], the sizes of conventional road guide signs that have standardized designs shall be as shown in Table 903.7.4.		'''Standard.''' Except as provided in [https://epg.modot.org/index.php?title=903.2_Extent_of_Signing#903.2.21_Dimensions_.28MUTCD_Section_2A.11.29 EPG 903.2.21], the sizes of conventional road guide signs that have standardized designs shall be as shown in Table 903.7.4.

	'''Support.''' [[903.2 Extent of Signing#903.2.13 Dimensions (MUTCD Section 2A.11)\|EPG 903.2.13]] contains information regarding the applicability of the various columns in Table 903.7.4.		'''Support.''' [[903.2 Extent of Signing#903.2.13 Dimensions (MUTCD Section 2A.11)\|EPG 903.2.13]] contains information regarding the applicability of the various columns in Table 903.7.4.
Line 256:		Line 256:
	'''Option.''' Route signs and auxiliary signs may be proportionally enlarged where greater legibility is needed.		'''Option.''' Route signs and auxiliary signs may be proportionally enlarged where greater legibility is needed.

	'''Support.''' Route signs are typically mounted in assemblies with auxiliary signs. [~~http~~://epg.modot.org/index.php/903.7_Conventional_Road_Guide_Signs#903.7.51_National_Scenic_Byways_Signs_.28D6-4.29_.28MUTCD_Section_2D.55.29 EPG 903.7.51] and [~~http~~://epg.modot.org/index.php/903.7_Conventional_Road_Guide_Signs#903.7.52_Missouri_Scenic_Byways_Signs_.28D6-4b.2C_D6-4c.2C_D6-4d.29 EPG 903.7.52] contain information regarding the signing for scenic byways.		'''Support.''' Route signs are typically mounted in assemblies with auxiliary signs. [https://epg.modot.org/index.php/903.7_Conventional_Road_Guide_Signs#903.7.51_National_Scenic_Byways_Signs_.28D6-4.29_.28MUTCD_Section_2D.55.29 EPG 903.7.51] and [https://epg.modot.org/index.php/903.7_Conventional_Road_Guide_Signs#903.7.52_Missouri_Scenic_Byways_Signs_.28D6-4b.2C_D6-4c.2C_D6-4d.29 EPG 903.7.52] contain information regarding the signing for scenic byways.

	[[903.9 General Information Signs#903.9.5 Auto Tour Route Signs (M17 series) (MUTCD Section 2H.07)\|EPG 903.9.5]] contains information regarding the signing for Auto Tour Routes.		[[903.9 General Information Signs#903.9.5 Auto Tour Route Signs (M17 series) (MUTCD Section 2H.07)\|EPG 903.9.5]] contains information regarding the signing for Auto Tour Routes.
Line 306:		Line 306:
	[[image:M2-1.gif\|center\|thumb\|<center>'''M2-1'''</center>\|95px]]		[[image:M2-1.gif\|center\|thumb\|<center>'''M2-1'''</center>\|95px]]

	'''Standard.''' The Junction (M2-1) auxiliary sign shall carry the abbreviated legend JCT and shall be mounted at the top of an assembly (see [~~http~~://epg.modot.org/index.php/903.7_Conventional_Road_Guide_Signs#903.7.27_Junction_Assembly_.28MUTCD_Section_2D.30.29 EPG 903.7.27]) directly above the route sign, the sign for an alternative route (see [~~http~~://epg.modot.org/index.php/903.7_Conventional_Road_Guide_Signs#903.7.16_ALTERNATE_Auxiliary_Signs_.28M4-1.29_.28MUTCD_Section_2D.17.29 EPG 903.7.16]) that is part of the route designation, or the Cardinal Direction auxiliary sign where access is available only to one direction of the intersected route. The minimum size of the Junction auxiliary sign shall be 21 in. x 15 in. for compatibility with auxiliary signs carrying arrow symbols.		'''Standard.''' The Junction (M2-1) auxiliary sign shall carry the abbreviated legend JCT and shall be mounted at the top of an assembly (see [https://epg.modot.org/index.php/903.7_Conventional_Road_Guide_Signs#903.7.27_Junction_Assembly_.28MUTCD_Section_2D.30.29 EPG 903.7.27]) directly above the route sign, the sign for an alternative route (see [https://epg.modot.org/index.php/903.7_Conventional_Road_Guide_Signs#903.7.16_ALTERNATE_Auxiliary_Signs_.28M4-1.29_.28MUTCD_Section_2D.17.29 EPG 903.7.16]) that is part of the route designation, or the Cardinal Direction auxiliary sign where access is available only to one direction of the intersected route. The minimum size of the Junction auxiliary sign shall be 21 in. x 15 in. for compatibility with auxiliary signs carrying arrow symbols.

	==903.7.14 Cardinal Direction Auxiliary Signs (M3-1 through M3-4) ([https://mutcd.fhwa.dot.gov/ MUTCD] Section 2D.15)==		==903.7.14 Cardinal Direction Auxiliary Signs (M3-1 through M3-4) ([https://mutcd.fhwa.dot.gov/ MUTCD] Section 2D.15)==
Line 371:		Line 371:


	'''Option.''' The TO (M4-5) auxiliary sign may be used to provide directional guidance to a particular road facility from other highways in the vicinity (see [~~http~~://epg.modot.org/index.php/903.7_Conventional_Road_Guide_Signs#903.7.28_Advance_Route_Turn_Assembly_.28MUTCD_Section_2D.31.29 EPG 903.7.28]).		'''Option.''' The TO (M4-5) auxiliary sign may be used to provide directional guidance to a particular road facility from other highways in the vicinity (see [https://epg.modot.org/index.php/903.7_Conventional_Road_Guide_Signs#903.7.28_Advance_Route_Turn_Assembly_.28MUTCD_Section_2D.31.29 EPG 903.7.28]).

	'''Standard.''' If used, the TO auxiliary sign shall be mounted directly above a route sign or an auxiliary sign for an alternative route. If a Cardinal Direction auxiliary sign is also included in the assembly, the TO auxiliary sign shall be mounted directly above the Cardinal Direction auxiliary sign.		'''Standard.''' If used, the TO auxiliary sign shall be mounted directly above a route sign or an auxiliary sign for an alternative route. If a Cardinal Direction auxiliary sign is also included in the assembly, the TO auxiliary sign shall be mounted directly above the Cardinal Direction auxiliary sign.
Line 550:		Line 550:
	'''Option.''' A Cardinal Direction auxiliary sign may be used with a Trailblazer assembly.		'''Option.''' A Cardinal Direction auxiliary sign may be used with a Trailblazer assembly.

	'''Guidance.''' The TO auxiliary sign, Cardinal Direction auxiliary sign and Directional Arrow auxiliary sign should be of the standard size provided for auxiliary signs of their respective type. The route sign should be the size provided in [~~http~~://epg.modot.org/index.php/903.7_Conventional_Road_Guide_Signs#903.7.11_Design_of_Route_Signs_.28MUTCD_Section_2D.11.29 EPG 903.7.11].		'''Guidance.''' The TO auxiliary sign, Cardinal Direction auxiliary sign and Directional Arrow auxiliary sign should be of the standard size provided for auxiliary signs of their respective type. The route sign should be the size provided in [https://epg.modot.org/index.php/903.7_Conventional_Road_Guide_Signs#903.7.11_Design_of_Route_Signs_.28MUTCD_Section_2D.11.29 EPG 903.7.11].

	Trailblazer assemblies may be installed with other Route Sign assemblies, or alone, in the immediate vicinity of the designated facilities.		Trailblazer assemblies may be installed with other Route Sign assemblies, or alone, in the immediate vicinity of the designated facilities.
Line 635:		Line 635:
	'''Standard.''' Destination (D1-1 through D1-3) signs shall be a horizontal rectangle displaying the name of a city, town or village and a directional arrow indicating the direction to the destination. Destination (D1 Series) signs shall not indicate distance to the destination.		'''Standard.''' Destination (D1-1 through D1-3) signs shall be a horizontal rectangle displaying the name of a city, town or village and a directional arrow indicating the direction to the destination. Destination (D1 Series) signs shall not indicate distance to the destination.

	Destination signs shall be provided at the junctions of all interstate, U.S. and state routes except where it is deemed not appropriate or routes that have no destination to be listed. Locations for which Destination signs might not be appropriate are business routes, loops, alternate routes or locations signed in [~~http~~://epg.modot.org/index.php/903.7_Conventional_Road_Guide_Signs#903.7.40_Destination_and_Distance_Signs_.28D1a_Series.29 EPG 903.7.40], Destination and Distance Signs (D1-1a Series).		Destination signs shall be provided at the junctions of all interstate, U.S. and state routes except where it is deemed not appropriate or routes that have no destination to be listed. Locations for which Destination signs might not be appropriate are business routes, loops, alternate routes or locations signed in [https://epg.modot.org/index.php/903.7_Conventional_Road_Guide_Signs#903.7.40_Destination_and_Distance_Signs_.28D1a_Series.29 EPG 903.7.40], Destination and Distance Signs (D1-1a Series).

	Destination signs shall be installed along crossroads within the limits of an interchange.		Destination signs shall be installed along crossroads within the limits of an interchange.
Line 652:		Line 652:
	\|}		\|}

	'''Standard.''' Destination signs that are used at circular intersections shall comply with the provisions of [~~http~~://epg.modot.org/index.php/903.7_Conventional_Road_Guide_Signs#903.7.34_Destination_Signs_.28D1_Series.29_.28MUTCD_Section_2D.37.29 EPG 903.7.34].		'''Standard.''' Destination signs that are used at circular intersections shall comply with the provisions of [https://epg.modot.org/index.php/903.7_Conventional_Road_Guide_Signs#903.7.34_Destination_Signs_.28D1_Series.29_.28MUTCD_Section_2D.37.29 EPG 903.7.34].

	'''Option.''' Exit destination (D1-1d, D1-1e) signs with diagonal upward-pointing arrows or Directional assemblies may be used to designate a particular exit from a circular intersection.		'''Option.''' Exit destination (D1-1d, D1-1e) signs with diagonal upward-pointing arrows or Directional assemblies may be used to designate a particular exit from a circular intersection.
Line 664:		Line 664:
	'''Support.''' Figs. 903.7.35.1 and 903.7.35.2 illustrate two examples of guide signing for circular intersections.		'''Support.''' Figs. 903.7.35.1 and 903.7.35.2 illustrate two examples of guide signing for circular intersections.

	[[903.5 Regulatory Signs\|EPG 903.5]] contains information regarding regulatory signs at circular intersections and [~~http~~://epg.modot.org/index.php/903.6_Warning_Signs EPG 903.6] contains information regarding warning signs at circular intersections.		[[903.5 Regulatory Signs\|EPG 903.5]] contains information regarding regulatory signs at circular intersections and [https://epg.modot.org/index.php/903.6_Warning_Signs EPG 903.6] contains information regarding warning signs at circular intersections.

	'''Standard.''' Diagrammatic guide signs for circular intersections shall not be used.		'''Standard.''' Diagrammatic guide signs for circular intersections shall not be used.
Line 674:		Line 674:
	==903.7.36 Destination Signs at Jughandles ([https://mutcd.fhwa.dot.gov/ MUTCD] Section 2D.39)==		==903.7.36 Destination Signs at Jughandles ([https://mutcd.fhwa.dot.gov/ MUTCD] Section 2D.39)==

	'''Standard.''' Destination signs that are used at jughandles shall comply with the provisions of [~~http~~://epg.modot.org/index.php/903.7_Conventional_Road_Guide_Signs#903.7.34_Destination_Signs_.28D1_Series.29_.28MUTCD_Section_2D.37.29 EPG 903.7.34].		'''Standard.''' Destination signs that are used at jughandles shall comply with the provisions of [https://epg.modot.org/index.php/903.7_Conventional_Road_Guide_Signs#903.7.34_Destination_Signs_.28D1_Series.29_.28MUTCD_Section_2D.37.29 EPG 903.7.34].

	==903.7.37 Location of Destination Signs ([https://mutcd.fhwa.dot.gov/ MUTCD] Section 2D.40)==		==903.7.37 Location of Destination Signs ([https://mutcd.fhwa.dot.gov/ MUTCD] Section 2D.40)==
Line 1,110:		Line 1,110:
	Horizontal lines of a color that contrasts with the sign background color should be used to separate groups of destinations by direction from each other.		Horizontal lines of a color that contrasts with the sign background color should be used to separate groups of destinations by direction from each other.

	'''Support.''' The basic requirement for all highway signs, including community wayfinding signs, is that they be legible to those for whom they are intended and that they be understandable in time to permit a proper response. [~~http~~://epg.modot.org/index.php/903.2_Extent_of_Signing#903.2.14_Sign_Design_.28MUTCD_Section_2A.06.29 EPG 903.2.14] contains additional information on the design of signs, including desirable attributes of effective designs.		'''Support.''' The basic requirement for all highway signs, including community wayfinding signs, is that they be legible to those for whom they are intended and that they be understandable in time to permit a proper response. [https://epg.modot.org/index.php/903.2_Extent_of_Signing#903.2.14_Sign_Design_.28MUTCD_Section_2A.06.29 EPG 903.2.14] contains additional information on the design of signs, including desirable attributes of effective designs.

	'''Guidance.''' Word messages should be as brief as practical, and the lettering should be large enough to provide the necessary legibility distance.		'''Guidance.''' Word messages should be as brief as practical, and the lettering should be large enough to provide the necessary legibility distance.
Line 1,116:		Line 1,116:
	'''Standard.''' The minimum specific ratio of letter height to legibility distance shall comply with the provisions of [[903.2 Extent of Signing#903.2.15 Word Messages (MUTCD Section 2A.13)\|EPG 903.2.15]]. The size of lettering used for destination and directional legends on community wayfinding signs shall comply with the provisions of minimum letter heights as provided in [[#903.7.6 Size of Lettering (MUTCD Section 2D.06)\|EPG 903.7.6]].		'''Standard.''' The minimum specific ratio of letter height to legibility distance shall comply with the provisions of [[903.2 Extent of Signing#903.2.15 Word Messages (MUTCD Section 2A.13)\|EPG 903.2.15]]. The size of lettering used for destination and directional legends on community wayfinding signs shall comply with the provisions of minimum letter heights as provided in [[#903.7.6 Size of Lettering (MUTCD Section 2D.06)\|EPG 903.7.6]].

	Interline and edge spacing shall comply with the provisions of [~~http~~://epg.modot.org/index.php?title=903.7_Conventional_Road_Guide_Signs#903.7.6_Size_of_Lettering_.28MUTCD_Section_2D.06.29 EPG 903.7.6].		Interline and edge spacing shall comply with the provisions of [https://epg.modot.org/index.php?title=903.7_Conventional_Road_Guide_Signs#903.7.6_Size_of_Lettering_.28MUTCD_Section_2D.06.29 EPG 903.7.6].

	Except as provided below, the lettering style used for destination and directional legends on community wayfinding guide signs shall comply with the provisions of [[#903.7.5 Lettering Style (MUTCD Section 2D.05)\|EPG 903.7.5]].		Except as provided below, the lettering style used for destination and directional legends on community wayfinding guide signs shall comply with the provisions of [[#903.7.5 Lettering Style (MUTCD Section 2D.05)\|EPG 903.7.5]].
Line 1,126:		Line 1,126:
	'''Standard.''' Except for signs that are intended to be viewed only by pedestrians, bicyclists stopped out of the flow of traffic, or occupants of parked vehicles, Internet and e-mail addresses, including domain names and uniform resource locators (URL), shall not be displayed on any community wayfinding guide signs or sign assembly.		'''Standard.''' Except for signs that are intended to be viewed only by pedestrians, bicyclists stopped out of the flow of traffic, or occupants of parked vehicles, Internet and e-mail addresses, including domain names and uniform resource locators (URL), shall not be displayed on any community wayfinding guide signs or sign assembly.

	The arrow location and priority order of destinations shall follow the provisions described in [[#903.7.8 Arrows (MUTCD Section 2D.08)\|EPG 903.7.8]] and [[#903.7.34 Destination Signs (D1 Series) (MUTCD Section 2D.37)\|EPG 903.7.34]]. Arrows shall be of the designs provided in [~~http~~://epg.modot.~~mo.gov~~/index.php/903.7_Conventional_Road_Guide_Signs#903.7.8_Arrows_.28MUTCD_Section_2D.08.29 EPG 903.7.8].		The arrow location and priority order of destinations shall follow the provisions described in [[#903.7.8 Arrows (MUTCD Section 2D.08)\|EPG 903.7.8]] and [[#903.7.34 Destination Signs (D1 Series) (MUTCD Section 2D.37)\|EPG 903.7.34]]. Arrows shall be of the designs provided in [https://epg.modot.org/index.php/903.7_Conventional_Road_Guide_Signs#903.7.8_Arrows_.28MUTCD_Section_2D.08.29 EPG 903.7.8].

	'''Option.''' Pictographs may be used on community wayfinding guide signs.		'''Option.''' Pictographs may be used on community wayfinding guide signs.