106.21 Summary of Materials Inspected - Revision history

Smithk: Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

2021-10-01T13:04:32Z

Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

← Older revision		Revision as of 08:04, 1 October 2021
Line 13:		Line 13:
	These documents should be completed and forwarded within four weeks for small projects or six weeks for large projects, from the date final quantities for the project have been established. A small contract is defined as having fewer than 40 [http://www.modot.mo.gov/business/contractor_resources/biditemslisting.htm bid items] and an original bid amount of less than $1,000,000.00. If for some reason the summary cannot be completed and forwarded within this time frame, Central Office Construction and Materials should be notified.		These documents should be completed and forwarded within four weeks for small projects or six weeks for large projects, from the date final quantities for the project have been established. A small contract is defined as having fewer than 40 [http://www.modot.mo.gov/business/contractor_resources/biditemslisting.htm bid items] and an original bid amount of less than $1,000,000.00. If for some reason the summary cannot be completed and forwarded within this time frame, Central Office Construction and Materials should be notified.

	The Resident Engineer’s staff or the district final plans processor will enter ~~a Key~~ Date ~~in SiteManager~~ (SM) to indicate that data required for the summary is ready for use and that no additional changes are anticipated. This ~~key date~~ will start the four- or six-week period.		The Resident Engineer’s staff or the district final plans processor will enter an Informational Date 030 Project Data Ready for Materials Summary (MCF) to indicate that data required for the summary is ready for use and that no additional changes are anticipated. This Informational Date will start the four- or six-week period.

	===106.21.1.1 Summary Packet of Materials Inspected===		===106.21.1.1 Summary Packet of Materials Inspected===
	The summary packet, as prepared through SM and Cognos, is to include the following components:		The summary packet, as prepared through AWP and Cognos, is to include the following components:

	:'''1)''' The standard cover letter indicating that the attached information has been reviewed and is correct. (Fig. 106.21.1)		:'''1)''' The standard cover letter indicating that the attached information has been reviewed and is correct. (Fig. 106.21.1)
Line 26:		Line 26:
	:'''2)''' Materials Summary, a standard Cognos report (Fig. 106.21.2). This report shows the bid quantity plus any change order quantities and multiplies it by the conversation factor to indicate the Represented Quantity as the amount that requires inspection. The report also highlights Category 2 sample records to reflect the status of satisfying the Buy America requirements.		:'''2)''' Materials Summary, a standard Cognos report (Fig. 106.21.2). This report shows the bid quantity plus any change order quantities and multiplies it by the conversation factor to indicate the Represented Quantity as the amount that requires inspection. The report also highlights Category 2 sample records to reflect the status of satisfying the Buy America requirements.

	:'''3)''' Sampling Checklist, a ~~standard SM~~ report. This report shows the amount of the [http://www.modot.mo.gov/business/contractor_resources/biditemslisting.htm bid item] and the number of samples taken to meet the sampling requirement. (Refer to Fig. 106.21.3)		:'''3)''' Sampling Checklist, a Cognos report. This report shows the amount of the [http://www.modot.mo.gov/business/contractor_resources/biditemslisting.htm bid item] and the number of samples taken to meet the sampling requirement. (Refer to Fig. 106.21.3)

	:'''4)''' Summary of Contract Asphalt Mix Designs, a standard Cognos report. This report takes the Mix ID and reports each component and its producer, listing them by material code. (Refer to Fig. 106.21.4.) The report only shows components for mixes reported to the contract.		:'''4)''' Summary of Contract Asphalt Mix Designs, a standard Cognos report. This report takes the Mix ID and reports each component and its producer, listing them by material code. (Refer to Fig. 106.21.4.) The report only shows components for mixes reported to the contract.

Smithk: /* Figures */

2021-09-24T16:26:41Z

Figures

← Older revision		Revision as of 11:26, 24 September 2021
Line 51:		Line 51:
	==Figures==		==Figures==

	[[image:106.21.1 2021.jpg\|center\|~~685px~~\|thumb\|<center>'''Fig. 106.21.1 Material Certifications'''</center>]]		[[image:106.21.1 2021.jpg\|center\|785px\|thumb\|<center>'''Fig. 106.21.1 Material Certifications'''</center>]]

	[[image:106.11.2 2021.jpg\|center\|825px\|thumb\|<center>'''Fig. 106.21.2 Example of "Summary of Materials for Contract"'''</center>]]		[[image:106.11.2 2021.jpg\|center\|825px\|thumb\|<center>'''Fig. 106.21.2 Example of "Summary of Materials for Contract"'''</center>]]

Smithk: /* Figures */

2021-09-24T16:25:39Z

Figures

← Older revision		Revision as of 11:25, 24 September 2021
Line 51:		Line 51:
	==Figures==		==Figures==

	[[image:106.21.1 2021.~~pdf~~\|center\|685px\|thumb\|<center>'''Fig. 106.21.1 Material Certifications'''</center>]]		[[image:106.21.1 2021.jpg\|center\|685px\|thumb\|<center>'''Fig. 106.21.1 Material Certifications'''</center>]]

	[[image:106.11.2 2021.jpg\|center\|825px\|thumb\|<center>'''Fig. 106.21.2 Example of "Summary of Materials for Contract"'''</center>]]		[[image:106.11.2 2021.jpg\|center\|825px\|thumb\|<center>'''Fig. 106.21.2 Example of "Summary of Materials for Contract"'''</center>]]

Smithk: /* Figures */ Per CM, replaced archaic V:drive info with eProject info

2021-09-24T16:23:04Z

Figures: Per CM, replaced archaic V:drive info with eProject info

← Older revision		Revision as of 11:23, 24 September 2021
Line 51:		Line 51:
	==Figures==		==Figures==

	[[image:106.21.1.~~jpg~~\|center\|685px\|thumb\|<center>'''Fig. 106.21.1 Material Certifications'''</center>]]		[[image:106.21.1 2021.pdf\|center\|685px\|thumb\|<center>'''Fig. 106.21.1 Material Certifications'''</center>]]

	[[image:106.11.2.~~gif~~\|center\|825px\|thumb\|<center>'''Fig. 106.21.2 Example of "Summary of Materials for Contract"'''</center>]]		[[image:106.11.2 2021.jpg\|center\|825px\|thumb\|<center>'''Fig. 106.21.2 Example of "Summary of Materials for Contract"'''</center>]]

	[[image:106.11.3.~~gif~~\|center\|725px\|thumb\|<center>'''Fig. 106.21.3 Sampling Checklist'''</center>]]		[[image:106.11.3 2021.jpg\|center\|725px\|thumb\|<center>'''Fig. 106.21.3 Sampling Checklist'''</center>]]

	[[image:106.11.4.gif\|center\|425px\|thumb\|<center>'''Fig. 106.21.4 Example of "Summary of Contract Asphalt Mix Designs"'''</center>]]		[[image:106.11.4.gif\|center\|425px\|thumb\|<center>'''Fig. 106.21.4 Example of "Summary of Contract Asphalt Mix Designs"'''</center>]]

Smithk: Per CM, replaced archaic V:drive info with eProject info

2021-09-24T16:15:28Z

Per CM, replaced archaic V:drive info with eProject info

← Older revision		Revision as of 11:15, 24 September 2021
Line 45:		Line 45:

	==106.21.2 Distribution==		==106.21.2 Distribution==
	The statement, summary of materials inspected packet and substantiating documents shall be saved electronically to the ~~V: drive in the folder "Contract Information Archive/D#/RE code/Contract ID#/~~Materials ~~Summary", for example: V:/Contract Information Archive/D06/6CD/040618~~-~~608/~~Materials ~~Summary~~. The ~~Key~~ Date ~~080 "~~Materials Summary ~~submitted~~ to ~~HQ"~~ in SM shall be ~~updated and an~~ email shall be sent to ~~Tina Graziano, Sr.~~ Administrative Technician notifying her of the completion of the materials summary.		The statement, summary of materials inspected packet and substantiating documents shall be saved electronically to eProjects with the Content Type of “CM Materials - Materials Summary”. The Actual Date for the Informational Date “080 Materials Summary Submitted to HQ” in AASHTOWARE Project (AWP) shall also be entered. An email with a link to the eProjects Materials Summary documents shall be sent to Bethany Evers Administrative Technician notifying her of the completion of the materials summary.

			CM Division will populate the Actual Date field for the AWP Informational “095 Materials Summary Approved by HQ”.

	==Figures==		==Figures==

Smithk: /* 106.21.1.1 Summary Packet of Materials Inspected */Per CM, added guidance to utilize NTPEP compliance that AASHTO already has in place for programmatic acceptance of Buy America. It significantly reduces paperwork and effort from suppliers, contractors, MoDOT and FHWA.

2021-02-25T16:51:55Z

106.21.1.1 Summary Packet of Materials Inspected: Per CM, added guidance to utilize NTPEP compliance that AASHTO already has in place for programmatic acceptance of Buy America. It significantly reduces paperwork and effort from suppliers, contractors, MoDOT and FHWA.

← Older revision		Revision as of 11:51, 25 February 2021
Line 22:		Line 22:
	:If the quantity inspected and reported is less than the required quantity, notation is to be made on the summary cover letter or attached to the summary on a separate sheet describing the basis of acceptance of the material.		:If the quantity inspected and reported is less than the required quantity, notation is to be made on the summary cover letter or attached to the summary on a separate sheet describing the basis of acceptance of the material.

	:If a material was used and not properly inspected, an explanation as to the basis of acceptance for use is to be shown on the summary or on an attached sheet. Any correspondence relative to the basis of acceptance should be attached to the summary. It is important that complete details be furnished as to the basis of acceptance.		:If a material was used and not properly inspected, an explanation as to the basis of acceptance for use is to be shown on the summary or on an attached sheet. Improper inspection includes not meeting Buy America requirements. Any correspondence relative to the basis of acceptance should be attached to the summary. It is important that complete details be furnished as to the basis of acceptance.

	:'''2)''' Materials Summary, a standard Cognos report (Fig. 106.21.2). This report shows the bid quantity plus any change order quantities and multiplies it by the conversation factor to indicate the Represented Quantity as the amount that requires inspection.		:'''2)''' Materials Summary, a standard Cognos report (Fig. 106.21.2). This report shows the bid quantity plus any change order quantities and multiplies it by the conversation factor to indicate the Represented Quantity as the amount that requires inspection. The report also highlights Category 2 sample records to reflect the status of satisfying the Buy America requirements.

	:'''3)''' Sampling Checklist, a standard SM report. This report shows the amount of the [http://www.modot.mo.gov/business/contractor_resources/biditemslisting.htm bid item] and the number of samples taken to meet the sampling requirement. (Refer to Fig. 106.21.3)		:'''3)''' Sampling Checklist, a standard SM report. This report shows the amount of the [http://www.modot.mo.gov/business/contractor_resources/biditemslisting.htm bid item] and the number of samples taken to meet the sampling requirement. (Refer to Fig. 106.21.3)

Smithk: /* 106.21.1.1 Summary Packet of Materials Inspected */Per Phys Lab, clarified guidance to make the Summary of Concrete Component Testing portion of the summary report optional

2015-05-28T19:00:24Z

106.21.1.1 Summary Packet of Materials Inspected: Per Phys Lab, clarified guidance to make the Summary of Concrete Component Testing portion of the summary report optional

← Older revision		Revision as of 14:00, 28 May 2015
Line 32:		Line 32:
	:'''5)''' Summary of Contract Concrete Mix Designs, a standard Cognos report. This report takes the PCC Mix ID information and reports each component, the producer supplier, and material information for a specific contract. (Refer to Fig. 106.21.5.) The report only shows components for mixes reported to the contract.		:'''5)''' Summary of Contract Concrete Mix Designs, a standard Cognos report. This report takes the PCC Mix ID information and reports each component, the producer supplier, and material information for a specific contract. (Refer to Fig. 106.21.5.) The report only shows components for mixes reported to the contract.

	:'''6)''' Summary of Concrete Component Testing. This Cognos report is designed to summarize the testing of concrete components. The report calculates the tonnage and number of days each component was used. It does this by using sample record quantities and concrete mix design information. If this information is incorrectly entered or missing, the report will not function. Once the usage data is calculated, the report compares that data to the tests reported. There is no hard rule to what is acceptable on this report since differing concrete usages are subject to the varying inspection requirements. It is the district Construction and Materials Engineer’s responsibility to ensure that the output of this report is complete, reasonable, and reflects proper application of the contract specifications. Refer to Fig. 106.21.6 for an example.		:'''6) (Optional)''' Summary of Concrete Component Testing. This Cognos report is designed to summarize the testing of concrete components. The report calculates the tonnage and number of days each component was used. It does this by using sample record quantities and concrete mix design information. If this information is incorrectly entered or missing, the report will not function. Once the usage data is calculated, the report compares that data to the tests reported. There is no hard rule to what is acceptable on this report since differing concrete usages are subject to the varying inspection requirements. It is the district Construction and Materials Engineer’s responsibility to ensure that the output of this report is complete, reasonable, and reflects proper application of the contract specifications. Refer to Fig. 106.21.6 for an example.

	Attachment Page(s), any supporting information relative to shortages or exceptions to standard policy.		Attachment Page(s), any supporting information relative to shortages or exceptions to standard policy.

Smithk: Per CM, "Cognos 8" replaced with more generic "Cognos"

2013-12-02T14:34:35Z

Per CM, "Cognos 8" replaced with more generic "Cognos"

← Older revision		Revision as of 09:34, 2 December 2013
Line 16:		Line 16:

	===106.21.1.1 Summary Packet of Materials Inspected===		===106.21.1.1 Summary Packet of Materials Inspected===
	The summary packet, as prepared through SM and Cognos 8, is to include the following components:		The summary packet, as prepared through SM and Cognos, is to include the following components:

	:'''1)''' The standard cover letter indicating that the attached information has been reviewed and is correct. (Fig. 106.21.1)		:'''1)''' The standard cover letter indicating that the attached information has been reviewed and is correct. (Fig. 106.21.1)
Line 24:		Line 24:
	:If a material was used and not properly inspected, an explanation as to the basis of acceptance for use is to be shown on the summary or on an attached sheet. Any correspondence relative to the basis of acceptance should be attached to the summary. It is important that complete details be furnished as to the basis of acceptance.		:If a material was used and not properly inspected, an explanation as to the basis of acceptance for use is to be shown on the summary or on an attached sheet. Any correspondence relative to the basis of acceptance should be attached to the summary. It is important that complete details be furnished as to the basis of acceptance.

	:'''2)''' Materials Summary, a standard Cognos 8 report (Fig. 106.21.2). This report shows the bid quantity plus any change order quantities and multiplies it by the conversation factor to indicate the Represented Quantity as the amount that requires inspection.		:'''2)''' Materials Summary, a standard Cognos report (Fig. 106.21.2). This report shows the bid quantity plus any change order quantities and multiplies it by the conversation factor to indicate the Represented Quantity as the amount that requires inspection.

	:'''3)''' Sampling Checklist, a standard SM report. This report shows the amount of the [http://www.modot.mo.gov/business/contractor_resources/biditemslisting.htm bid item] and the number of samples taken to meet the sampling requirement. (Refer to Fig. 106.21.3)		:'''3)''' Sampling Checklist, a standard SM report. This report shows the amount of the [http://www.modot.mo.gov/business/contractor_resources/biditemslisting.htm bid item] and the number of samples taken to meet the sampling requirement. (Refer to Fig. 106.21.3)

	:'''4)''' Summary of Contract Asphalt Mix Designs, a standard Cognos 8 report. This report takes the Mix ID and reports each component and its producer, listing them by material code. (Refer to Fig. 106.21.4.) The report only shows components for mixes reported to the contract.		:'''4)''' Summary of Contract Asphalt Mix Designs, a standard Cognos report. This report takes the Mix ID and reports each component and its producer, listing them by material code. (Refer to Fig. 106.21.4.) The report only shows components for mixes reported to the contract.

	:'''5)''' Summary of Contract Concrete Mix Designs, a standard Cognos 8 report. This report takes the PCC Mix ID information and reports each component, the producer supplier, and material information for a specific contract. (Refer to Fig. 106.21.5.) The report only shows components for mixes reported to the contract.		:'''5)''' Summary of Contract Concrete Mix Designs, a standard Cognos report. This report takes the PCC Mix ID information and reports each component, the producer supplier, and material information for a specific contract. (Refer to Fig. 106.21.5.) The report only shows components for mixes reported to the contract.

	:'''6)''' Summary of Concrete Component Testing. This Cognos 8 report is designed to summarize the testing of concrete components. The report calculates the tonnage and number of days each component was used. It does this by using sample record quantities and concrete mix design information. If this information is incorrectly entered or missing, the report will not function. Once the usage data is calculated, the report compares that data to the tests reported. There is no hard rule to what is acceptable on this report since differing concrete usages are subject to the varying inspection requirements. It is the district Construction and Materials Engineer’s responsibility to ensure that the output of this report is complete, reasonable, and reflects proper application of the contract specifications. Refer to Fig. 106.21.6 for an example.		:'''6)''' Summary of Concrete Component Testing. This Cognos report is designed to summarize the testing of concrete components. The report calculates the tonnage and number of days each component was used. It does this by using sample record quantities and concrete mix design information. If this information is incorrectly entered or missing, the report will not function. Once the usage data is calculated, the report compares that data to the tests reported. There is no hard rule to what is acceptable on this report since differing concrete usages are subject to the varying inspection requirements. It is the district Construction and Materials Engineer’s responsibility to ensure that the output of this report is complete, reasonable, and reflects proper application of the contract specifications. Refer to Fig. 106.21.6 for an example.

	Attachment Page(s), any supporting information relative to shortages or exceptions to standard policy.		Attachment Page(s), any supporting information relative to shortages or exceptions to standard policy.

Smithk: Per CM, deleted Summaries of Mixing Facility Components, I.A.S and F.A.S.T since these processes no longer apply.

2012-11-19T20:59:03Z

Per CM, deleted Summaries of Mixing Facility Components, I.A.S and F.A.S.T since these processes no longer apply.

← Older revision		Revision as of 15:59, 19 November 2012
Line 32:		Line 32:
	:'''5)''' Summary of Contract Concrete Mix Designs, a standard Cognos 8 report. This report takes the PCC Mix ID information and reports each component, the producer supplier, and material information for a specific contract. (Refer to Fig. 106.21.5.) The report only shows components for mixes reported to the contract.		:'''5)''' Summary of Contract Concrete Mix Designs, a standard Cognos 8 report. This report takes the PCC Mix ID information and reports each component, the producer supplier, and material information for a specific contract. (Refer to Fig. 106.21.5.) The report only shows components for mixes reported to the contract.

	:'''6)''' Summary of Mixing Facility Components, a standard Cognos 8 report, is prepared for each mixing facility, for each year a facility was used on the contract. This lists the rationale for acceptance of each of the components used in the mix by producer and material code. (Refer to Fig. 106.21.6.) Projects let after April 1, 2006 and projects let prior to April 1, 2006 that have been Change Ordered to include the 2006 specification changes will not be required to include the Summary of Mixing Facility Components report. If a project began with the July 1, 2004 specifications, but was then Change Ordered to include the 2006 specifications, a Summary of Mixing Facility Components report will be required for the period of time prior to inclusion of the 2006 specifications. Modifications to the Summary of Contract Asphalt Mix Designs and Summary of Contract Concrete Mix Designs reports will list the rationale for acceptance of each of the components used in the mix design for projects administered with the 2006 specifications.		:'''6)''' Summary of Concrete Component Testing. This Cognos 8 report is designed to summarize the testing of concrete components. The report calculates the tonnage and number of days each component was used. It does this by using sample record quantities and concrete mix design information. If this information is incorrectly entered or missing, the report will not function. Once the usage data is calculated, the report compares that data to the tests reported. There is no hard rule to what is acceptable on this report since differing concrete usages are subject to the varying inspection requirements. It is the district Construction and Materials Engineer’s responsibility to ensure that the output of this report is complete, reasonable, and reflects proper application of the contract specifications. Refer to Fig. 106.21.6 for an example.

	:The report will require the year in question to be selected. If work on the job continues longer than a year, it may be necessary to create a separate report for each year of construction for the same facility.

	:To get components to show up on this report, when reporting a sample, make sure to designate the mixing facility on the Other Tab at least once a year for all components. Mixing facility components will no longer need to be reported to the Other Tab for projects administered with the April 1, 2006 specifications as these associations will be taking place directly in the Mix Design Materials window. Sample IDs representing material acceptance will be tied directly to the individual components of a mix as the Mix ID is entered in SM.

	:'''7)''' Summary of I.A.S., a standard Cognos 8 report. This report lists each IAS test taken to determine if the test meets the designated requirements. (Refer to Fig. 106.11.7.) Even if no IAS tests were taken, please include as a placeholder to complete the packet. For projects started under Project Based IAS and completed under System Based IAS, include the report for those tests which were Project Based and indicate in the cover letter that the balance of the IAS testing was covered by System Based IAS. For projects let after April 1, 2008, this report is not required and System Based IAS will be assumed for the project.

	:'''8)''' Summary of F.A.S.T., a standard Cognos 8 report. This report lists each FAST test taken to determine if they meet the requirements as set out in [[:Category:123 Federal-Aid Highway Program#123.3.2 Federal-Aid Acceptance Sampling and Testing (FAST)\|EPG 123.3.2 Federal-Aid Acceptance Sampling and Testing (FAST)]]. (Refer to Fig. 106.21.8.) Even if no FAST tests were taken, please include as a placeholder to complete the packet.

	~~:'''9~~)''' Summary of Concrete Component Testing. This Cognos 8 report is designed to summarize the testing of concrete components. The report calculates the tonnage and number of days each component was used. It does this by using sample record quantities and concrete mix design information. If this information is incorrectly entered or missing, the report will not function. Once the usage data is calculated, the report compares that data to the tests reported. There is no hard rule to what is acceptable on this report since differing concrete usages are subject to the varying inspection requirements. It is the district Construction and Materials Engineer’s responsibility to ensure that the output of this report is complete, reasonable, and reflects proper application of the contract specifications. Refer to Fig. 106.21.9 for an example.

	Attachment Page(s), any supporting information relative to shortages or exceptions to standard policy.		Attachment Page(s), any supporting information relative to shortages or exceptions to standard policy.
Line 69:		Line 59:
	[[image:106.11.5.gif\|center\|725px\|thumb\|<center>'''Fig. 106.21.5 Example of "Summary of Contract Concrete Mix Designs"'''</center>]]		[[image:106.11.5.gif\|center\|725px\|thumb\|<center>'''Fig. 106.21.5 Example of "Summary of Contract Concrete Mix Designs"'''</center>]]

	[[image:106.11.6.gif\|center\|725px\|thumb\|<center>'''Fig. 106.21.6 ~~Example of "Summary of Mixing Facility Components"'''</center>]]~~		[[image:106.11.9.gif\|center\|725px\|thumb\|<center>'''Fig. 106.21.6 Example of "Summary of Concrete Component Testing"'''</center>]]

	~~[[image:106.11.7.gif\|center\|725px\|thumb\|<center>'''Fig. 106.21.7 Example of "Summary of I.A.S."'''</center>]]~~

	~~[[image:106.11.8.gif\|center\|725px\|thumb\|<center>'''Fig. 106.21.8 Example of "Summary of F.A.S.T."'''</center>]]~~

	~~[[image:106.11.9.gif\|center\|725px\|thumb\|<center>'''Fig. 106.21.9~~ Example of "Summary of Concrete Component Testing"'''</center>]]


	[[category: 106 Control of Material\|106.21]]		[[category: 106 Control of Material\|106.21]]

Smithk: Per CM, updated contact info

2012-06-13T19:38:00Z

Per CM, updated contact info

← Older revision		Revision as of 14:38, 13 June 2012
Line 55:		Line 55:

	==106.21.2 Distribution==		==106.21.2 Distribution==
	The statement, summary of materials inspected packet and substantiating documents shall be saved electronically to the V: drive in the folder "Contract Information Archive/D#/RE code/Contract ID#/Materials Summary", for example: V:/Contract Information Archive/D06/6CD/040618-608/Materials Summary. The Key Date 080 "Materials Summary submitted to HQ" in SM shall be updated and an email shall be sent to ~~Kim Temmen~~, Sr. Administrative Technician notifying her of the completion of the materials summary.		The statement, summary of materials inspected packet and substantiating documents shall be saved electronically to the V: drive in the folder "Contract Information Archive/D#/RE code/Contract ID#/Materials Summary", for example: V:/Contract Information Archive/D06/6CD/040618-608/Materials Summary. The Key Date 080 "Materials Summary submitted to HQ" in SM shall be updated and an email shall be sent to Tina Graziano, Sr. Administrative Technician notifying her of the completion of the materials summary.

	==Figures==		==Figures==

	[[image:106.21.1 ~~materials certifications~~.jpg\|center\|~~725px~~\|thumb\|<center>'''Fig. 106.21.1 Material Certifications'''</center>]]		[[image:106.21.1.jpg\|center\|685px\|thumb\|<center>'''Fig. 106.21.1 Material Certifications'''</center>]]

	[[image:106.11.2.gif\|center\|825px\|thumb\|<center>'''Fig. 106.21.2 Example of "Summary of Materials for Contract"'''</center>]]		[[image:106.11.2.gif\|center\|825px\|thumb\|<center>'''Fig. 106.21.2 Example of "Summary of Materials for Contract"'''</center>]]

← Older revision		Revision as of 11:23, 24 September 2021
Line 51:		Line 51:
	==Figures==		==Figures==

	[[image:106.21.1.~~jpg~~\|center\|685px\|thumb\|<center>'''Fig. 106.21.1 Material Certifications'''</center>]]		[[image:106.21.1 2021.pdf\|center\|685px\|thumb\|<center>'''Fig. 106.21.1 Material Certifications'''</center>]]

	[[image:106.11.2.~~gif~~\|center\|825px\|thumb\|<center>'''Fig. 106.21.2 Example of "Summary of Materials for Contract"'''</center>]]		[[image:106.11.2 2021.jpg\|center\|825px\|thumb\|<center>'''Fig. 106.21.2 Example of "Summary of Materials for Contract"'''</center>]]

	[[image:106.11.3.~~gif~~\|center\|725px\|thumb\|<center>'''Fig. 106.21.3 Sampling Checklist'''</center>]]		[[image:106.11.3 2021.jpg\|center\|725px\|thumb\|<center>'''Fig. 106.21.3 Sampling Checklist'''</center>]]

	[[image:106.11.4.gif\|center\|425px\|thumb\|<center>'''Fig. 106.21.4 Example of "Summary of Contract Asphalt Mix Designs"'''</center>]]		[[image:106.11.4.gif\|center\|425px\|thumb\|<center>'''Fig. 106.21.4 Example of "Summary of Contract Asphalt Mix Designs"'''</center>]]